From: Spencer CHAN (spencer@xxxxxxxxxxxxxxxx)
Date: Wed Apr 21 1999 - 05:11:08 GMT-3
The map worths ONE point!
You will given a class B major number and the question ask U to assign /24
prefix unless otherwise stated. You will find yourself assigning /24s to
/28s on different subnets. Don't worry about that, it's only a small
portion and is clearly documented on the question paper.
As said, the map is part of your answer, so you have to draw one anyway.
And documenting the whole thing is very important. It helps you get
through your config step by step, and troubleshoot it finally.
On Mon, 20 Apr 2099, David Wong wrote:
> Hi, everyone:
>
> Questions:
>
> When taking the lab,
>
> 1) Do we draw a map for our own convenience; or are we required to draw one
> as part of the lab assignment?
>
> 2) Do we need to assign our own IP addresses or the addressing scheme is
> already there on the paper.
>
> 3) I actually thought the lab would provide a diagram with detailed
> description of the tasks. Correct ?
>
> Any thoughts ?
>
> Thanks for sharing !
>
> David
>
> -----Original Message-----
> From: Dana Gertsch <dgertsch@recom.com>
> To: Kwon, George M <George.Kwon@CIGNA.COM>
> Cc: ccielab@groupstudy.com <ccielab@groupstudy.com>
> Date: Tuesday, April 20, 1999 3:33 PM
> Subject: Re: Taking The Lab
>
>
> >My normal recommendation for anyone taking the lab is to take the first
> 30 -45
> >minutes and read through and document your work before you start. This
> >relieves a lot of pressure by knowing what things you may have trouble
> with,
> >and pushing them off until the end of the day.
> >
> >Remember that one of the things they grade you on is documentation.
> >Documenting your work will also help you to troubleshoot.
> >
> >This method also allows you to hit each router one time, enter all the
> >configuration changes, then test it before moving on.
> >
> >Dana
> >
> >
> >"Kwon, George M" wrote:
> >
> >> Hi,
> >>
> >> I am taking the Lab on June 1st (my first try), stress is starting to
> build
> >> up. Can someone advice on what I should configure fist ? Should I start
> >> configuring all the interfaces first, or should I concentrate on all the
> >> routers that are involved with a particular routing protocol first.
> >>
> >> thanks.
> >
>
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 08:21:36 GMT-3