RE: IPSLA

Configuration:
!interface Loopback5 ip address 10.199.199.52 255.255.255.255!ip sla 51
icmp-echo 60.22.210.210 source-ip 10.199.199.52 request-data-size 100
threshold 180 timeout 1000 frequency 12ip sla schedule 51 life forever
start-time now!ip sla 52 icmp-echo 54.10.14.110 source-ip 10.199.199.52
request-data-size 100 threshold 180 timeout 1000 frequency 12ip sla schedule
52 life forever start-time now!track 51 ip sla 51 reachability delay down
17!track 52 ip sla 52 reachability delay down 17!ip access-list extended IGW
permit ip 192.136.12.0 0.0.0.255 any!route-map TEST permit 10 match ip address
IGW set ip next-hop verify-availability 72.100.121.81 1 track 51 set ip
next-hop verify-availability 72.100.121.81 2 track 52 set ip next-hop
10.5.11.2!interface GigabitEthernet0/5.1 ip address 10.70.70.2 255.255.255.252
ip policy route-map TEST!ip route 0.0.0.0 0.0.0.0 72.100.121.81 track 51ip
route 0.0.0.0 0.0.0.0 58.148.120.254 50 track 52!

> From: ebay_products_at_hotmail.com
> To: ccielab_at_groupstudy.com
> Subject: RE: IPSLA
> Date: Fri, 24 Apr 2015 16:41:19 -0700
>
> Ok, I borrowed a lab setup and tried to replicate this, it is not working
the
> way I expected. Not sure what is wrong in the configuration?
>
> !interface Loopback5 ip address 10.199.199.52 255.255.255.255!ip sla 51
> icmp-echo 60.22.210.210 source-ip 10.199.199.52 request-data-size 100
> threshold 180 timeout 1000 frequency 12ip sla schedule 51 life forever
> start-time now!ip sla 52 icmp-echo 54.10.14.110 source-ip 10.199.199.52
> request-data-size 100 threshold 180 timeout 1000 frequency 12ip sla
schedule
> 52 life forever start-time now!track 51 ip sla 51 reachability delay down
> 17!track 52 ip sla 52 reachability delay down 17!ip access-list extended
IGW
> permit ip 192.136.12.0 0.0.0.255 any!route-map TEST permit 10 match ip
address
> IGW set ip next-hop verify-availability 72.100.121.81 1 track 51 set ip
> next-hop verify-availability 72.100.121.81 2 track 52 set ip next-hop
> 10.5.11.2!interface GigabitEthernet0/5.1 ip address 10.70.70.2
255.255.255.252
> ip policy route-map TEST!ip route 0.0.0.0 0.0.0.0 72.100.121.81 track 51ip
> route 0.0.0.0 0.0.0.0 58.148.120.254 50 track 52!
> yuri
>
> > From: ebay_products_at_hotmail.com
> > To: ccielab_at_groupstudy.com
> > Subject: IPSLA
> > Date: Fri, 24 Apr 2015 13:03:18 -0700
> >
> > The idea is to test Internet connectivity from 2 different connections.
If
> one
> > link fails, the traffic flows through the other link. I have a firewall
in
> > between.
> > The issue is that when I am using IPSLA, since the firewall are stateful
> the
> > inbound and outbound traffic should be coming from the same interface.
> > I don't have lab hours but will try to get some topology build next
> weekend.
> > Want to check with smart men and women if the link below can solve this?
> > Specially the traffic going out and coming back is stateful.
> > https://learningnetwork.cisco.com/thread/54245?start=0&tstart=0
> > yuri
> >
> >
> > Blogs and organic groups at http://www.ccie.net
> >
> > _______________________________________________________________________
> > Subscription information may be found at:
> > http://www.groupstudy.com/list/CCIELab.html
>
>
> Blogs and organic groups at http://www.ccie.net
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html

Blogs and organic groups at http://www.ccie.net
Received on Fri Apr 24 2015 - 16:49:24 ART