Re: Cisco features on Juniper routers/switches

To add what Scott has said,

I am using HP MSR routers with GRE over IPSec configuration. They are working
perfectly fine with Cisco being the hub.

Also i have found MSR to be great alternative to Cisco/Juniper for routing
perspective. Found all the features that typically are required in large
branch setup.

To many's surprise, MSR supports EAA, similar to EEM. Even the syntax is
similar lolz. Its good to try new things that are so promising.

     On Monday, February 23, 2015 9:54 PM, Scott Morris <swm_at_emanon.com>
wrote:

 I9m not quite sure it9s that black and white.B :)B Things interoperate
based on their ability (and adherance) to work with standards.B There are
some variations that different vendors do or do not do above/beyond those
standards.B And that9s where you get into issues.

That and pre-standard (cutting edge) things
B Any time there is not
agreement about how something is supposed to work, that9s where we get
problems.B But otherwise, if we are talking about standards, almost every
vendor plays very well with one another.B Certainly in the Juniper/Cisco
space

HTH,

Scott

-----Original Message-----
From: Cisco Fanatic <ebay_products_at_hotmail.com>
Reply-To: Cisco Fanatic <ebay_products_at_hotmail.com>
Date: Monday, February 23, 2015 at 11:12 AM
To: "ccielab_at_groupstudy.com" <ccielab_at_groupstudy.com>
Subject: Cisco features on Juniper routers/switches

>I want to understand and learn from the bright minds - What complexities
>and
>feature sets makes Cisco and Juniper router/switches interoperable? Can
>these
>two platforms really interoperate in a large environment?
>
>yuri
>
>
>Blogs and organic groups at http://www.ccie.net
>
>_______________________________________________________________________
>Subscription information may be found at:
>http://www.groupstudy.com/list/CCIELab.html

Blogs and organic groups at http://www.ccie.net
Received on Tue Feb 24 2015 - 09:28:10 ART