Re: Router Interface

yeh I mean where's the L3 interface with ip dhcp autoconfig for the DHCPDISCOVER messages!!??

how can you expect it to work...

--
BR
Tony
Sent from my iPad
> On 22 Jul 2014, at 15:26, "Andrew LaPorte" <andy_at_cloud9.net> wrote:
> 
> What is plugged into FastEthernet8?  Ibm thinking that maybe the IP on
> FastEthernet8 really need to be in VLAN1 and that the FastEthernet8 really
> needs to be line FastEthernet1-7.  I think that fastethernet 0 -8 are access
> ports and Interface GigabyteEthernet0 is your WAN interface.
> 
> 
> 
> These links might help you out:
> 
> 
> 
> http://www.cisco.com/c/en/us/td/docs/routers/access/800/860-880-890/software/
> configuration/guide/SCG880-860.pdf
> 
> http://www.cisco.com/c/en/us/td/docs/routers/access/800/software/configuratio
> n/guide/SCG800Guide.html
> 
> 
> 
> Another note, you included your username and password.  If they are real b
> you should changing them once you have the system working.
> 
> 
> 
> Andy
> 
> 
> 
> From: Mateen Taj [mailto:taj.mateen_at_gmail.com]
> Sent: Tuesday, July 22, 2014 10:08 AM
> To: Andrew LaPorte
> Cc: Cisco certification
> Subject: Re: Router Interface
> 
> 
> 
> Dear Andrew,
> 
> 
> 
> Thank you very much, Please find below configuration of the router, I want all
> L2 should get the IP from a DHCP pool
> 
> 
> 
> ip dhcp excluded-address 192.168.181.1
> ip dhcp excluded-address 192.168.181.2
> ip dhcp excluded-address 192.168.181.10
> !
> ip dhcp pool BIL_pool
> import all
> network 192.168.181.0 255.255.255.0
> dns-server 213.42.20.20
> default-router 192.168.181.1
> lease 8
> !
> !
> ip cef
> no ip domain lookup
> ip domain name yourdomain.com <http://yourdomain.com>
> no ipv6 cef
> !
> multilink bundle-name authenticated
> !
> license udi pid CISCO892-K9 sn FGL1651
> !
> !
> interface BRI0
> no ip address
> encapsulation hdlc
> shutdown
> isdn termination multidrop
> !
> interface FastEthernet0
> no ip address
> !
> interface FastEthernet1
> no ip address
> !
> interface FastEthernet2
> no ip address
> !
> interface FastEthernet3
> no ip address
> !
> interface FastEthernet4
> no ip address
> !
> interface FastEthernet5
> no ip address
> !
> interface FastEthernet6
> no ip address
> !
> interface FastEthernet7
> switchport mode trunk
> no ip address
> !
> interface FastEthernet8
> ip address 192.168.181.1 255.255.255.0
> ip nat inside
> ip virtual-reassembly in
> ip tcp adjust-mss 1452
> duplex auto
> speed auto
> !
> interface GigabitEthernet0
> description ***physical interface bound to dialer0
> no ip address
> ip nat outside
> ip virtual-reassembly in
> duplex auto
> speed auto
> pppoe-client dial-pool-number 1
> !
> interface Vlan1
> description $ETH-SW-LAUNCH$$INTF-INFO-FE 1$
> no ip address
> ip tcp adjust-mss 1452
> !
> interface Dialer0
> ip address negotiated
> ip mtu 1492
> ip nat outside
> ip virtual-reassembly in
> encapsulation ppp
> dialer pool 1
> dialer-group 1
> ppp authentication chap pap callin
> ppp chap hostname bil
> ppp chap password 0 a83wikhr
> ppp pap sent-username bil password 0 a83wikhr
> no cdp enable
> !
> ip forward-protocol nd
> !
> !
> ip http server
> ip http access-class 23
> ip http authentication local
> ip http secure-server
> ip http timeout-policy idle 60 life 86400 requests 10000
> ip nat inside source list 1 interface Dialer0 overload
> ip nat inside source list acl1 pool pool1
> ip route 0.0.0.0 0.0.0.0 Dialer0
> !
> access-list 1 permit 192.168.181.0 0.0.0.255
> dialer-list 1 protocol ip permit
> no cdp run
> !
> !
> !
> !
> !
> !
> control-plane
> 
> 
> 
> On Tue, Jul 22, 2014 at 5:56 PM, Andrew LaPorte <andy_at_cloud9.net
> <mailto:andy_at_cloud9.net> > wrote:
> 
> I can try to help.
> 
> I'm guessing you have some type of L3 address (VLAN) on the device.  Is the
> DHCP range, port and the L3 VLAN in address range?  Is the access point
> expecting the port in access or trunk mode?
> 
> If these do not help send me a copy of the config for the router and AP.
> 
> Andy
> 
> 
> -----Original Message-----
> From: nobody_at_groupstudy.com <mailto:nobody_at_groupstudy.com>
> [mailto:nobody_at_groupstudy.com <mailto:nobody_at_groupstudy.com> ] On Behalf Of
> Mateen Taj
> Sent: Tuesday, July 22, 2014 8:57 AM
> To: Cisco certification
> Subject: Router Interface
> 
> Dear Expert,
> 
> I need your help to troubleshoot the router(cisco 892) , how to get a DHCP
> IP on a L2 interface on the same router , i have connected an access point
> on L2  interface but it is not taking  the IP from a DHCP pool
> 
> Regards
> 
> 
> 
> Blogs and organic groups at http://www.ccie.net
> 
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
> 
> 
> Blogs and organic groups at http://www.ccie.net
> 
> _______________________________________________________________________
> Subscription information may be found at: 
> http://www.groupstudy.com/list/CCIELab.html
Blogs and organic groups at http://www.ccie.net