RE: Route not OSPF table

Narbik,

Yes.

for example...

interface loopback 0
ip ospf network point-to-point

or

interface serial 0/0/0
ip ospf network point-to-multipoint

on a frame-relay hub router for example...

a network type of BROADCAST on the hub, going to ospf network type of
POINT-TO-POINT on the spokes will form neighbor relationship but will not
exchange routes.

have to change hub interface ospf network type to POINT-TO-MULTIPOINT and also
make sure change

ip ospf hello-interval 10

dk
reston

> Date: Wed, 4 Jun 2014 14:51:45 +1000
> Subject: Re: Route not OSPF table
> From: narbikk_at_gmail.com
> To: dkenline_at_hotmail.com
> CC: dtandou_at_gmail.com; tasneemjan_at_googlemail.com; ccielab_at_groupstudy.com
>
> Doug,
>
> I think you mean the network type, correct?
>
>
> On Wed, Jun 4, 2014 at 12:36 PM, Doug Kenline <dkenline_at_hotmail.com> wrote:
>
> > make sure you have compatible ospf interface types
> >
> > show ip ospf interface
> >
> > also you do not say where RD is connected to, unless I am missing
> > something.....
> >
> >
> > dk
> > reston
> >
> >
> >
> > > Date: Tue, 3 Jun 2014 12:21:53 -0400
> > > Subject: Re: Route not OSPF table
> > > From: dtandou_at_gmail.com
> > > To: tasneemjan_at_googlemail.com
> > > CC: ccielab_at_groupstudy.com
> > >
> > > For which router ? all of them ?
> > >
> > > Thanks
> > >
> > >
> > > On Tue, Jun 3, 2014 at 11:40 AM, Tauseef Khan
<tasneemjan_at_googlemail.com
> > >
> > > wrote:
> > >
> > > > Could you send output of sh ip ospf int br and sho ip ospf nei please
> > > >
> > > > Kind regards
> > > >
> > > > Tauseef
> > > > mobile: +44 7837209187
> > > >
> > > >
> > > > On 3 June 2014 16:29, Mohamed Tandou <dtandou_at_gmail.com> wrote:
> > > >
> > > >> Guys,
> > > >> Can anyone help with this? I have 5 routers connected. See below the
> > setup
> > > >>
> > > >> RA,RB,RC,RD and RE
> > > >>
> > > >> RA is directly connected to RB and RC
> > > >> RB is directly connected to RA and RC
> > > >> RE is directly connected to RC
> > > >> There are ospf adj between RA and his directly connected neig same
as
> > RB
> > > >> and RC
> > > >> There are multiple subnets on RE being advertised in ospf when i do
> > show
> > > >> ip
> > > >> route i see the subnets being advertised from RE on RC,RD and RB but
i
> > > >> don't see the same subnets on RA. it says subnet not in table.
> > > >> Any idea why i am missing the subnet on RA ?
> > > >>
> > > >> Thanks
> > > >>
> > > >> TD
> > > >>
> > > >>
> > > >> Blogs and organic groups at http://www.ccie.net
> > > >>
> > > >>
> > _______________________________________________________________________
> > > >> Subscription information may be found at:
> > > >> http://www.groupstudy.com/list/CCIELab.html
> > >
> > >
> > > Blogs and organic groups at http://www.ccie.net
> > >
> > > _______________________________________________________________________
> > > Subscription information may be found at:
> > > http://www.groupstudy.com/list/CCIELab.html
> >
> >
> > Blogs and organic groups at http://www.ccie.net
> >
> > _______________________________________________________________________
> > Subscription information may be found at:
> > http://www.groupstudy.com/list/CCIELab.html
> >
> >
> >
> >
> >
> >
> >
> >
>
>
> --
>
> *Narbik Kocharians*CCSI#30832, CCIE# 12410 (R&S, SP, Security)
> *www.MicronicsTraining.com* <http://www.micronicstraining.com/>
> Sr. Technical Instructor
> YES! We take Cisco Learning Credits!
> A Cisco Learning Partner
>
>
> Blogs and organic groups at http://www.ccie.net
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html

Blogs and organic groups at http://www.ccie.net
Received on Wed Jun 04 2014 - 23:36:27 ART