Re: same subnet different vlans communication

How so ? Switches do not support NAT and the router is on a different
broadcast domain...

IF the 10.10.2.1 to be pinged is to be answered by the switch stack,
then somehow there has to be a door to vlan 2.

Another option is to put some other 10.10.2.1 in vlan 3 :)

-Carlos

Ryan West @ 29/05/2014 16:30 -0300 dixit:
> Double nat ugliness is an option.
>
> Sent from handheld.
>
>> On May 29, 2014, at 3:19 PM, "JB Poplawski" <jb.poplawski_at_gmail.com> wrote:
>>
>> Not that I can see, perhaps I'm interpreting the question differently.
>> JB
>>
>>
>>> On Thu, May 29, 2014 at 11:50 AM, John Sciarra <jjsciarra_at_gmail.com> wrote:
>>>
>>> Hi Experts,
>>> In the follow scenario, R1 Fa0/0 directly connects to SW1 Fa1/1. Without
>>> changing Fa1/1 to access vlan 2,
>>> is there anyway to ping 10.10.2.1 from R1?
>>> Thanks,
>>> John
>>>
>>>
>>> SW1:
>>> interface vlan 2
>>> ip address 10.10.2.1 255.255.255.0
>>> !
>>> interface FastEthernet1/1
>>> description ###R1 FastEthernet0/0 ###
>>> switchport mode access
>>> switchport access vlan 3
>>> !
>>> R1:
>>> interface FastEthernet0/0
>>> ip address 10.10.2.2 255.255.255.0
>>> !
>>> ip route 0.0.0.0 0.0.0.0 10.10.2.1
>>> !
>>>
>>>
>>> Blogs and organic groups at http://www.ccie.net
>>>
>>> _______________________________________________________________________
>>> Subscription information may be found at:
>>> http://www.groupstudy.com/list/CCIELab.html
>>
>>
>> Blogs and organic groups at http://www.ccie.net
>>
>> _______________________________________________________________________
>> Subscription information may be found at:
>> http://www.groupstudy.com/list/CCIELab.html
>
>
> Blogs and organic groups at http://www.ccie.net
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
>
>
>
>
>
>
>

-- 
Carlos G Mendioroz  <tron_at_huapi.ba.ar>  LW7 EQI  Argentina
Blogs and organic groups at http://www.ccie.net