HELP!!! ASA Anyconnect VPN subnet cannot access LAN resources

Hello Experts,

I need some help with AnyConnect VPN I configured on ASA 5510. Please see
diagram to better understand below details. http://tinypic.com/r/9uvfix/8

The configuration, from making connection to the ASA through the vpn client
works fine. I can connect, authenticate (to local and LDAP), get an ip
address but once it is connected, I cannot access local resources inside
the network (LAN).

The VPN is configured on the INSIDE interface of the ASA and then 1:1 NAT
on Meraki MX90

If I use LAN's DHCP server instead of the IP POOL on the ASA, I obviously
get the same IP addresses as the LAN and local resource access (RDP,
fileshares, etc.) works fine.

On ASA I do have splittunnel enabled, I do have a route to the IP POOL
subnet on meraki for local servers to get to the VPN subnet and also I have
intra/inter interface traffic.

Other than the VPN there is nothing else configured on the ASA.

Considering the diagram, considering the fact that its only using one
inside interface for VPN and VPN traffic basically makes U-Turn on ASA,
what exactly do I need to do on the ASA to allow different subnet/VPN IP
POOL to access inside resources?

Any help/direction would be greatly appreciate.

thanks,

Haroon

Blogs and organic groups at http://www.ccie.net
Received on Wed May 28 2014 - 21:15:41 ART