RE: Reflexive Access - List on Cisco 3560 / 3750 switch

Please note if you're studying for the new version 5 lab the Reflexive ACL
has been removed. The only IPv4 ACL's being tested on the version 5 lab are
below:

IPv4 access control lists (standard, extended, time-based)

Tyde Systems provides consulting services, training services and Cisco
reselling services. Give me a call or send me an email to sign up for your
free network assessment (up to 10 devices).

Jeffrey Lodwick - CCIE 15671 R&S
Senior Data Engineer / Owner
Jeff_at_tydesystems.com
Office: 303-346-9988
Mobile: 303-919-1366
Tyde Systems
www.tydesystems.com

-----Original Message-----
From: nobody_at_groupstudy.com [mailto:nobody_at_groupstudy.com] On Behalf Of ftt
Sent: Friday, May 23, 2014 3:46 AM
To: Cisco certification
Subject: Reflexive Access - List on Cisco 3560 / 3750 switch

HI All,

I configured the following reflexive ACL and it works on routers but doesn't
work on cisco 3560 or 3750 switches running Advance Ip services image. The
switches does accept all the commands.

Is Reflexive ACL not supported on these platforms or are I missing
something?

*interface FastEthernetx/xip address 10.1.1.1 255.255.255.0ip access-group
INBOUND inip access-group OUTBOUND outduplex autospeed auto!!ip access-list
extended INBOUNDpermit ospf any anyevaluate MIRRORip access-list extended
OUTBOUNDpermit tcp any any reflect MIRRORpermit icmp any any reflect
MIRRORpermit udp any any reflect MIRRORdeny ip any any log!*

Blogs and organic groups at http://www.ccie.net
Received on Fri May 23 2014 - 15:21:07 ART