Broadcast & Multicast

Is there a command on a Router to stop broadcase and multicast storm. The
storm-control broadcase and storm-control multicast command works only on the
swich interfaces. I don't see these commands for router. I am running
"universalk9-mz.152-3.T3.bin" IOS.

RTR001#sh int g0/0
GigabitEthernet0/0 is up, line protocol is up
  Hardware is iGbE, address is 4403.a7ce.af80 (bia 4403.a7ce.af80)
  Description: Cogent Layer 2 100MB to San Mateo
  Internet address is 10.255.0.25/30
  MTU 1500 bytes, BW 100000 Kbit/sec, DLY 100 usec,
     reliability 255/255, txload 167/255, rxload 13/255
  Encapsulation ARPA, loopback not set
  Keepalive set (10 sec)
  Full Duplex, 100Mbps, media type is RJ45
  output flow-control is unsupported, input flow-control is unsupported
  ARP type: ARPA, ARP Timeout 04:00:00
  Last input 00:00:00, output 00:00:00, output hang never
  Last clearing of "show interface" counters 00:31:26
  Input queue: 0/75/0/0 (size/max/drops/flushes); Total output drops: 169
  Queueing strategy: fifo
  Output queue: 0/40 (size/max)
  5 minute input rate 5136000 bits/sec, 3121 packets/sec
  5 minute output rate 65540000 bits/sec, 6103 packets/sec
     6685736 packets input, 1316347676 bytes, 0 no buffer
     Received 407 broadcasts (0 IP multicasts)
     0 runts, 0 giants, 0 throttles
     0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored
     0 watchdog, 407 multicast, 0 pause input
     13228169 packets output, 636240204 bytes, 0 underruns
     0 output errors, 0 collisions, 0 interface resets
     0 unknown protocol drops
     0 babbles, 0 late collision, 0 deferred
     0 lost carrier, 0 no carrier, 0 pause output
     0 output buffer failures, 0 output buffers swapped out

Yuri

Blogs and organic groups at http://www.ccie.net
Received on Tue Apr 29 2014 - 09:43:46 ART