Re: OT: Nexus 5k Error-Disables HP-Blade Interfaces after 6.0.2

Juan,

Not sure if this is related, but we had an issue with HP / NX 5k. We
were using HP's blade chassis with flex connect. The version of flex we used
did not support 8Gb FC. We were told by both HP and Cisco that we had to
downgrade to 4GB. This was a limitation of the HP firmware, which they have
related as fixed after version 4.

Even if this isn't your issue, I'd
suggest getting HP involved as well.

David

________________________________
From: Juan Faure <fferrer10_at_gmail.com>
To: Cisco certification
<ccielab_at_groupstudy.com>
Sent: Wednesday, April 2, 2014 2:17 AM
Subject: OT:
Nexus 5k Error-Disables HP-Blade Interfaces after 6.0.2 NX-OS Upgrade
 

Hi
guys,

I know this is not the most apropiate forum to speak about this
problem...
Anyway, maybe somebody has got an issue similar to this one:
-Nexus 5548UP with FET 2K, upgrading nx-os from 5.1.3 to 6.0.2

-After
upgrade, some of the HP-Blade server interfaces were going to
"err-disabled"
state with this system message :
17:23:09.845 sw-cpd-mm-n5k-4
%ETHPORT-5-IF_DOWN_ERROR_DISABLED: Interface
Ethernet110/1/13 is down (*Error
disabled. **Reason:Disabled by Server Mgr
triggered*)

-After doing
"shutdown/no shutdown", these interfaces recovered

I have checked the
reported bug about nx-os releases, but there is no
similar issues reported by
Cisco...

Maybe anybody can help?

TIA and best regards

-- 
Juan Faure
Blogs and organic groups at http://www.ccie.net