IPV6 prefix-list

I came upon a strange problem when working on the IPV6 labs. I can't seem to
configure "ipv6 prefix-list abc ..." on any of my 1841's. My 2611's and
switches have no problem. The following contains the pertinent output:

Rack1R4(config)#do sh ver
Cisco IOS Software, 1841 Software (C1841-ADVENTERPRISEK9-M), Version
12.4(24)T1, RELEASE SOFTWARE (fc3)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2009 by Cisco Systems, Inc.
Compiled Fri 19-Jun-09 13:52 by prod_rel_team

ROM: System Bootstrap, Version 12.3(8r)T9, RELEASE SOFTWARE (fc1)

Rack1R4 uptime is 13 minutes
System returned to ROM by power-on
System image file is "flash:c1841-adventerprisek9-mz.124-24.T1.bin"

This product contains cryptographic features and is subject to United
States and local country laws governing import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. and local country laws. By using this product you
agree to comply with applicable laws and regulations. If you are unable
to comply with U.S. and local laws, return this product immediately.

A summary of U.S. laws governing Cisco cryptographic products may be found at:
http://www.cisco.com/wwl/export/crypto/tool/stqrg.html

If you require further assistance please contact us by sending email to
export_at_cisco.com.

Cisco 1841 (revision 6.0) with 238592K/23552K bytes of memory.
Processor board ID FTX1046W0DV
2 FastEthernet interfaces
2 Serial(sync/async) interfaces
1 Virtual Private Network (VPN) Module
DRAM configuration is 64 bits wide with parity disabled.
191K bytes of NVRAM.
62720K bytes of ATA CompactFlash (Read/Write)

Configuration register is 0x2102

Rack1R4(config)#ipv6 prefi
Rack1R4(config)#ipv6 prefix-list ?
  sequence-number Include/exclude sequence numbers in NVGEN

Rack1R4(config)#ipv6 prefix-list
% Incomplete command.

Rack1R4(config)#do sh run
Building configuration...

Current configuration : 2079 bytes
!
version 12.4
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
!
hostname Rack1R4
!
boot-start-marker
boot-end-marker
!
logging message-counter syslog
enable password cisco
!
no aaa new-model
dot11 syslog
ip source-route
!
!
!
!
ip cef
no ip domain lookup
ipv6 unicast-routing
ipv6 cef
!
multilink bundle-name authenticated
!
!
!
!
!
archive
 log config
  hidekeys
!
!
!
!
!
!
!
!
interface Loopback0
 ip address 150.1.4.4 255.255.255.0
 ip rip advertise 10
!
interface Loopback100
 no ip address
 ipv6 address FC00:1:0:4::4/64
 ipv6 rip RIPNG enable
!
interface FastEthernet0/0
 ip address 204.12.1.4 255.255.255.0
 ip rip advertise 10
 duplex auto
 speed auto
!
interface FastEthernet0/1
 ip address 155.1.146.4 255.255.255.0
 ip rip advertise 10
 duplex auto
 speed auto
 ipv6 address 2001:1:0:146::/64 eui-64
 ipv6 rip RIPNG enable
 ipv6 rip RIPNG summary-address FC00:1::/61
!
interface Serial0/0/0
 ip address 155.1.0.4 255.255.255.0
 ip rip advertise 10
 encapsulation frame-relay
 ip split-horizon
 ipv6 address FE80::4 link-local
 ipv6 address 2001:1:0:1234::4/64
 ipv6 rip RIPNG enable
 clock rate 128000
 frame-relay map ip 155.1.0.1 405
 frame-relay map ip 155.1.0.2 405
 frame-relay map ip 155.1.0.3 405
 frame-relay map ip 155.1.0.5 405 broadcast
 frame-relay map ipv6 2001:1:0:1234::1 405
 frame-relay map ipv6 2001:1:0:1234::2 405
 frame-relay map ipv6 2001:1:0:1234::3 405
 frame-relay map ipv6 2001:1:0:1234::5 405 broadcast
 no frame-relay inverse-arp
!
interface Serial0/1/0
 ip address 155.1.45.4 255.255.255.0
 ip rip advertise 10
 clock rate 128000
!
router rip
 version 2
 timers basic 10 40 30 60
 network 150.1.0.0
 network 155.1.0.0
 network 204.12.1.0
 no auto-summary
!
ip forward-protocol nd
no ip http server
no ip http secure-server
!
!
!
ipv6 router rip RIPNG
!
!
!
!
!
!
!
control-plane
!
!
!
line con 0
 exec-timeout 0 0
 privilege level 15
 logging synchronous
line aux 0
 exec-timeout 0 0
 privilege level 15
line vty 0 4
 password cisco
 login
!
scheduler allocate 20000 1000
end

Blogs and organic groups at http://www.ccie.net
Received on Thu Mar 20 2014 - 17:37:47 ART