Fabric path issue, all of my switches shows metric of 40 or 80

Hi,

I setup fabric path between 2x7k and 2x5k . Generic setup.

7k1 7k2
 | |
5k1----5k2
 | |
 fex fex

***** 7k1 and 5k2 are connected,as well I cannot draw it here.

***** 7k2 and 5k1 are connected as well , I cannot draw it here.

two issues that faced :

- a vlan 100. shows up in "sh fabricpath isis route" which is not a fabric
path vlan on any of my switches. I HAVE NO CLUE WHERE IS THIS VLAN COME
FROM.

vlan 100 is an ethernet vlan on my switch not a fabric path vlan. but it
shows up along with my fabric path vlans.

- all of my routes are showing metric of 40 or 80. On all 4 switches this
is the case. I should see metric 0 on at least on one of switches!!!!

I havent included config as it's a generic setup, switch-ID, sw mode fab on
interfaces.

Any clue appreciate how I can troubleshoot this ?

Thanks

Blogs and organic groups at http://www.ccie.net
Received on Thu Feb 20 2014 - 01:17:17 ART