Re: IOS XRv !!

This is where they moved too..

https://upload.cisco.com/cgi-bin/swc/fileexg/main.cgi?CONTYPES=Cisco-IOS-XRv
On Feb 14, 2014 10:07 AM, "Nick Griffin" <nick.jon.griffin_at_gmail.com> wrote:

> I too have had issues finding the image on CCO. Anyone have an updated
> link?
>
>
> On Fri, Feb 14, 2014 at 8:26 AM, Joe Sanchez <marco207p_at_gmail.com> wrote:
>
> > I know I watch a YouTube on this last week and he was able to get it
> > working very easily with Virtualbox and GNS3.
> >
> > Regards,
> > Joe Sanchez
> >
> > ( please excuse the brevity of this email as it was sent via a mobile
> > device. Please excuse misspelled words or sentence structure.)
> >
> > On Feb 14, 2014, at 7:19 AM, Tom Kacprzynski <tom.kac_at_gmail.com> wrote:
> >
> > > Thanks for the links and tips Yuri!
> > >
> > > Has any one else had a chance to run this on QEMU on a MAC, in GNS3? I
> > got
> > > it working yesterday, but it takes forever to load the vXR. I gave it 4
> > GB,
> > > but the process wasn't using that much, so RAM can't be an issue.
> > >
> > > Thanks
> > >
> > > Tom
> > >
> > >
> > > On Fri, Feb 14, 2014 at 6:34 AM, Alessandro Braga <
> sandro.unix_at_gmail.com
> > >wrote:
> > >
> > >> Yuri,
> > >>
> > >> great news. Thanks for sharing your experiences.
> > >>
> > >> I will do tests in the next week.
> > >>
> > >> BR,
> > >>
> > >>
> > >> 2014-02-14 1:12 GMT-02:00 Yuri Bank <yuribank_at_gmail.com>:
> > >>
> > >>> Something is up with the mailing list?? Not seeing any messages.
> > >>>
> > >>> -yurib
> > >>> On Feb 9, 2014 10:54 PM, "Yuri Bank" <yuribank_at_gmail.com> wrote:
> > >>>
> > >>>> Ok. Just an update for those interested.
> > >>>>
> > >>>>
> > >>>> I basically followed this guide:
> > >>>> https://supportforums.cisco.com/docs/DOC-39939
> > >>>>
> > >>>> I've added a few extra tips:
> > >>>>
> > >>>> *You will need the latest version of QEMU, or the UDP tunnels patch
> if
> > >>> you
> > >>>> have a version < 1.0)
> > >>>>
> > >>>> *Convert to the vmdk image to qcow2 (may not be necessary depending
> on
> > >>> the
> > >>>> version of qemu you have. I had some problems booting the image
> while
> > >> it
> > >>>> was in vmdk format)
> > >>>>
> > >>>> qemu-img convert -f vmdk -O qcow2 iosxrv-demo.vmdk iosxrv-demo.qcow2
> > >>>>
> > >>>> *create two copies of the image:
> > >>>>
> > >>>> Now you are ready to to run the VM.
> > >>>>
> > >>>> qemu-system-x86_64 \
> > >>>> -hda iosxrv-demo1.qcow2 \
> > >>>> -enable-kvm \
> > >>>> -m 3072 \
> > >>>> -serial telnet:localhost:2001,server,nowait \
> > >>>> -net nic,vlan=1,macaddr=00:aa:aa:aa:aa:11 -net
> > >>>> socket,vlan=1,udp=:8001,localaddr=:7001 \
> > >>>> -net nic,vlan=2,macaddr=00:aa:aa:aa:aa:12 -net
> > >>>> socket,vlan=2,udp=:8002,localaddr=:7002 \
> > >>>>
> > >>>>
> > >>>> qemu-system-x86_64 \
> > >>>> -hda iosxrv-demo2.qcow2 \
> > >>>> -enable-kvm \
> > >>>> -m 3072 \
> > >>>> -serial telnet:localhost:2002,server,nowait \
> > >>>> -net nic,vlan=1,macaddr=00:bb:bb:bb:bb:11 -net
> > >>>> socket,vlan=1,udp=:7001,localaddr=:8001 \
> > >>>> -net nic,vlan=2,macaddr=00:bb:bb:bb:bb:12 -net
> > >>>> socket,vlan=2,udp=:7002,localaddr=:8002 \
> > >>>>
> > >>>>
> > >>>> GNS3:
> > >>>>
> > >>>> You can also just add the qcow2 image as a QEMU Host in GNS3. This
> > will
> > >>>> make everything drag and drop, and you can deploy your topology as
> you
> > >>>> would normally in GNS3.
> > >>>>
> > >>>> So far I have a topology ( fully virtual ) with a few IOS XRv
> routers,
> > >>>> JunsOS Olives, and a 3700s running in dynamips.
> > >>>>
> > >>>>
> > >>>> I've tested the following protocols:
> > >>>>
> > >>>> OSPF: Good
> > >>>> LDP: Good
> > >>>> RSVP-TE: Good.
> > >>>> MPLS transit Data-plane GOOD (see exception below)
> > >>>>
> > >>>> VPLS.
> > >>>> *L2vpn ( Martini) LDP signaled VFI works in the control-plane. But
> the
> > >>>> data-plane functionality is NOT there. Packets received on the CE
> > >> facing
> > >>>> interface (Attachment circuit) are not forwarded :-(
> > >>>> *L2vpn ( kompella) BGP Auto-Discovery. I'm able to get the l2vpn
> vpls
> > >>>> address-family configured & running in BGP. I'm also able to
> exchange
> > >>> vpls
> > >>>> NLRI. Obviously, with the same forwarding issues mentioned above.
> > >>>>
> > >>>>
> > >>>> Cisco is going in the right direction with this. I hope they expand
> > the
> > >>> L2
> > >>>> functions. Being able to configure the services is GREAT, but it
> would
> > >> be
> > >>>> really nice to send a few pings through to verify the configuration,
> > >> and
> > >>> to
> > >>>> see what the label stacks looks like, etc.........
> > >>>>
> > >>>> -YuriB
> > >>>>
> > >>>>
> > >>>> On Sun, Feb 9, 2014 at 12:47 PM, Yuri Bank <yuribank_at_gmail.com>
> > wrote:
> > >>>>
> > >>>>> I will posting instructions on how to get this setup on Linux (
> > >> QEMU/KVM
> > >>>>> ) and fully integrated with Dynamips IOS routers & Real Hardware.
> > >>>>>
> > >>>>>
> > >>>>> w00t!
> > >>
> >
> http://www.cisco.com/en/US/docs/ios_xr_sw/ios_xrv/install_config/b_xrvr_432_chapter_01.html
> > >>>>>
> > >>>>>
> > >>>>> -YuriB
> > >>>
> > >>>
> > >>> Blogs and organic groups at http://www.ccie.net
> > >>>
> > >>>
> _______________________________________________________________________
> > >>> Subscription information may be found at:
> > >>> http://www.groupstudy.com/list/CCIELab.html
> > >>
> > >>
> > >> --
> > >> Alessandro Braga
> > >> CCIE #30939
> > >>
> > >>
> > >> Blogs and organic groups at http://www.ccie.net
> > >>
> > >>
> _______________________________________________________________________
> > >> Subscription information may be found at:
> > >> http://www.groupstudy.com/list/CCIELab.html
> > >
> > >
> > > Blogs and organic groups at http://www.ccie.net
> > >
> > > _______________________________________________________________________
> > > Subscription information may be found at:
> > > http://www.groupstudy.com/list/CCIELab.html
> >
> >
> > Blogs and organic groups at http://www.ccie.net
> >
> > _______________________________________________________________________
> > Subscription information may be found at:
> > http://www.groupstudy.com/list/CCIELab.html
>
>
> Blogs and organic groups at http://www.ccie.net
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html

Blogs and organic groups at http://www.ccie.net
Received on Fri Feb 14 2014 - 23:08:20 ART