RE: MPLS-BGP PE-CE Default-route problem

Thanks guys for replying.

i have only access to CE (with no vrf, just using the main routing table)
routers as there is a MPLS SP that is giving us the link. Yes i am trying to
get the default-route from CE1-->PE-->P-->PE-->CE2 ( though i am assuming that
SP have a P router)
I am assuming that the SP is filtering my default out, waiting for them to
confirm.
CE#show ip bgp neigh 10.1.3.4 advBGP table version is 11, local router ID is
172.17.1.80Status codes: s suppressed, d damped, h history, * valid, > best, i
- internal, r RIB-failure, S StaleOrigin codes: i - IGP, e - EGP,
? - incomplete
   Network Next Hop Metric LocPrf Weight Path*> 0.0.0.0
0.0.0.0 0 32768 ?*> 172.16.0.0 0.0.0.0
0 32768 i
Total number of prefixes 2

> CC: evazquez_at_gmail.com; khanzadap_at_hotmail.com; ccielab_at_groupstudy.com
> From: mothafungla_at_gmail.com
> Subject: Re: MPLS-BGP PE-CE Default-route problem
> Date: Thu, 2 Jan 2014 00:09:05 +0000
> To: raaki.88_at_gmail.com
>
> Default-originate under the PE's address-family vrf X should be good
>
> --
> BR
>
> Tony
>
> Sent from my iPad
>
> > On 1 Jan 2014, at 16:44, Rakesh M <raaki.88_at_gmail.com> wrote:
> >
> > Hi,
> >
> > Can you paste the output of the below command ?
> >
> >
> > show bgp * all neighbors x.x.x.x advertised-routes
> >
> >
> > Do you see anything about default-network setup
> >
> > Thank You
> >
> >
> >> On Wed, Jan 1, 2014 at 9:10 PM, Eduardo Vazquez <evazquez_at_gmail.com>
wrote:
> >>
> >> If you are going through a vendor for your MPLS service you likely have
to
> >> ask them to pass a default route. Sprint and level3 require a request.
> >>
> >> Please confirm your set up:
> >>
> >> SiteA -- MPLS cloud -- SiteB
> >>
> >> Sending default route from site a to site b?
> >>
> >>> On Wednesday, January 1, 2014, sameer khan wrote:
> >>>
> >>> Hi folks,
> >>>
> >>> I am trying to generate default-route on mpls l3vpn link (from an SP)
> >> with
> >>> bgp
> >>> as pe-ce protocol. As far as i know normal ways of distributing default
> >>> routes
> >>> should work i.e.
> >>> 1) With network command2) with redistribution3) default-originate
command
> >>> per
> >>> neighbor.
> >>> router bgp 65000 no synchronization bgp log-neighbor-changes
> >> redistribute
> >>> static neighbor 10.1.3.4 remote-as 48695 neighbor 10.1.3.4
> >>> default-originate
> >>> no auto-summary
> >>>
> >>> but unfortunately none of them is working . I was wonder if the i am
> >> doing
> >>> something wrong or missing something. If not then does mpls l3vpn
> >> provider
> >>> do
> >>> they normally filter out default-routes ??
> >>> Thanks
> >>>
> >>>
> >>> Blogs and organic groups at http://www.ccie.net
> >>>
> >>> _______________________________________________________________________
> >>> Subscription information may be found at:
> >>> http://www.groupstudy.com/list/CCIELab.html
> >>
> >>
> >> Blogs and organic groups at http://www.ccie.net
> >>
> >> _______________________________________________________________________
> >> Subscription information may be found at:
> >> http://www.groupstudy.com/list/CCIELab.html
> >
> >
> > Blogs and organic groups at http://www.ccie.net
> >
> > _______________________________________________________________________
> > Subscription information may be found at:
> > http://www.groupstudy.com/list/CCIELab.html
>
>
> Blogs and organic groups at http://www.ccie.net
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html

Blogs and organic groups at http://www.ccie.net
Received on Thu Jan 02 2014 - 06:09:05 ART