Re: NXOS upgrade on parent switch and affect on FEX

I do have some documentation that I've put together for the companies I've
worked for on this but I'm not sure where Cisco has this documented. It's
all from personal experience.

On Mon, Dec 30, 2013 at 6:21 PM, Cisco Fanatic <ebay_products_at_hotmail.com>wrote:

> Do you have a procedural document or a Cisco document that you can share.
> Best Regards, Yuri
>
>
> > Date: Mon, 30 Dec 2013 13:57:02 -0600
> > Subject: Re: NXOS upgrade on parent switch and affect on FEX
> > From: mmarvel37122_at_gmail.com
> > To: anthonybonilla.ccie_at_gmail.com
> > CC: ccielab_at_groupstudy.com
>
> >
> > OK, if you are dual homed, here's what's going to happen. After you
> > upgrade the first 5K, if there's a difference in the FEX firmware, they
> > will be attached to the un-upgraded 5K and not to the upgraded one.
> You'll
> > be able to see which one controls them by doing a SHOW FEX on both 5Ks.
> If
> > you can take the downtime hit, you can just upgrade the 2nd 5K but
> > understand you'll lose all connectivity to your FEX when that 5K reboots,
> > they will download their firmware and reconnect to the upgraded 5K. If
> you
> > want to do it in a controlled manner, reload each FEX one at a time.
> > (Reload fex xxx) They take about 2-3 minutes in my experience... wait
> > until each one is done before moving on.
> >
> > Here's my general procedure for upgrading:
> >
> > 1. Upgrade vPC primary 5K
> > 2. Reload each FEX. Wait until each is completely up and active on the
> > upgraded 5K before doing the next one.
> > 3. Once all FEX are reloaded and controlled by the upgraded 5K, upgrade
> > the 2nd.
> >
> > Let me know if you have any questions.
> >
> > Thanks.
> >
> >
> > On Mon, Dec 30, 2013 at 1:49 PM, Anthony <anthonybonilla.ccie_at_gmail.com
> >wrote:
> >
> > > Dual homed to a pair.
> > >
> > > Sent from my iPhone
> > >
> > > On Dec 30, 2013, at 2:47 PM, "mmarvel37122 ." <mmarvel37122_at_gmail.com>
> > > wrote:
> > >
> > > Are your FEX 2Ks single homed into one 5K or dual homed into a pair of
> > > 5Ks? There are different behaviors depending on which way you have them
> > > done.
> > >
> > > Thanks.
> > >
> > >
> > > On Mon, Dec 30, 2013 at 12:25 PM, Anthony Bonilla <
> > > anthonybonilla.ccie_at_gmail.com> wrote:
> > >
> > >> Hi guys,
> > >>
> > >> I have to plan for upgrading few of my Nexus 5k switches that are
> hosting
> > >> few FEX 2k and I was wondering if there is anything special I have to
> do
> > >> once I upgrade 5k. Would 2k automatically download the code or I have
> to
> > >> do it manually and in case if two codes are not in sync between
> parent and
> > >> FEX, what is the affect of this on FEX module ports? TIA.
> > >>
> > >> Tony
> > >>
> > >>
> > >> Blogs and organic groups at http://www.ccie.net
> > >>
> > >>
> _______________________________________________________________________
> > >> Subscription information may be found at:
> > >> http://www.groupstudy.com/list/CCIELab.html
> >
> >
> > Blogs and organic groups at http://www.ccie.net
> >
> > _______________________________________________________________________
> > Subscription information may be found at:
> > http://www.groupstudy.com/list/CCIELab.html

Blogs and organic groups at http://www.ccie.net
Received on Mon Dec 30 2013 - 19:29:18 ART