Re: OSPF route-type per neighbor

Hmm not possible there will only be one ABR which sets the P-bit to 1 based on highest router-id and at redistribution point the ASBR you can leave the redistribution as default which will be N2 then E2 and a metric of 20 by the time the ABR converts type 7 to a type 5 LSA or N1 and E1 by the time the ABR converts to a type 5 LSA (this would need setting at the ASBR at redistribution point to metric-type 1)

More to the point what are you trying to achieve or what is the question asking?

--
BR
Tony
> On 18 Dec 2013, at 08:39, sameer khan <khanzadap_at_hotmail.com> wrote:
> 
> hey folks
> 1.1.1.0/24|R1--R3|      |R2--R4
> 
> R1 is the asbr redistributing routes from rip (1.1.1.0/24). Is it possible to
> set route-type to E1 for R2 and E2 for R3.
> Thanks
> 
> 
> Blogs and organic groups at http://www.ccie.net
> 
> _______________________________________________________________________
> Subscription information may be found at: 
> http://www.groupstudy.com/list/CCIELab.html
Blogs and organic groups at http://www.ccie.net