Re: Apply ACL on SVI

So I think you can apply Router ACLs on 4500 switches. Just an FYI, you
couldnt do the same on a cat 3650/3750 switches (at least the last time I
checked/tried).

Please see below for more information on the cat 4500 switches.

http://www.cisco.com/en/US/docs/switches/lan/catalyst4500/12.2/31sga/configuration/guide/secure.html#wp1050430

HTH

Sadiq

On Mon, Nov 11, 2013 at 3:43 PM, Vishal Rane <vishal.rane_at_hotmail.co.in>wrote:

> hi
>
> cisco 4507
> version 12.4
>
>
> ------------------------------
> Date: Mon, 11 Nov 2013 14:34:27 +0000
> Subject: Re: Apply ACL on SVI
> From: sadiqtanko_at_gmail.com
> To: vishal.rane_at_hotmail.co.in
> CC: ccielab_at_groupstudy.com
>
> Hi Vishal,
>
> This is not possible on some Cisco switches. It will be useful if you can
> specify the switch hardware and software version.
>
> Sadiq
>
>
> On Mon, Nov 11, 2013 at 2:19 PM, Vishal Rane <vishal.rane_at_hotmail.co.in>wrote:
>
> Hello
> Here is scenario for ACL on SVI
> plz guide with right inbond / outbond acl to apply on SVI
>
>
> office_A connect to Office_B on different floors on vlan 10
> need to allow inbond and outbond traffic
> Config of Office_A and host
> VLAN
> int vlan 10
> ip address 192.168.177.254 255.255.255.252
> Allow the following host to communicate with host of Office_B
> host 192.168.110 port 443
> host 192.168.1.16
> network 192.168.25.0/24
> Network of Office_B
> allow following host to communicate with hos of Office_A
> 192.168.100.10 port 443
> 1192.168.100.17
> 192.168.27.0/24
>
>
> thanks
> Vishal
>
>
> Blogs and organic groups at http://www.ccie.net
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
>
>
>
>
>
>
>
>
>
>
> --
> CCIEx2 (R&S|Sec) #19963
>

-- 
CCIEx2 (R&S|Sec) #19963
Blogs and organic groups at http://www.ccie.net