This is an ACE20, right ? If I were you, I would open a TAC case and ask
them to provide this release:
c6ace-t1k9-mz.A2_3_6c.bin
I still don't know why they didn't publish it on CCO. I have it since
February/2013.
The release you're running is 4 years old.
Regards,
Antonio Soares, CCIE #18473 (R&S/SP)
amsoares_at_netcabo.pt
http://www.ccie18473.net
-----Original Message-----
From: nobody_at_groupstudy.com [mailto:nobody_at_groupstudy.com] On Behalf Of
gaston brait
Sent: sexta-feira, 11 de Outubro de 2013 14:23
To: ccielab_at_groupstudy.com
Subject: OT- ACE problem
Hi group,
Has anyone encountered a problem in which probes will faill because of lack
of resources on the context?Log will not provide any relevant infoThe probes
fail because no syn ack recieved Thanks, Gaston
# show verCisco Application Control Software (ACSW)TAC support:
http://www.cisco.com/tacCopyright (c) 2002-2009, Cisco Systems, Inc. All
rights reserved.The copyrights to certain works contained herein are owned
byother third parties and are used and distributed under license.Some parts
of this software are covered under the GNU PublicLicense. A copy of the
license is available athttp://www.gnu.org/licenses/gpl.html.
Software loader: Version 12.2[121] system: Version A2(3.0) [build
3.0(0)A2(3.0)] system image file: [LCP] disk0:c6ace-t1k9-mz.A2_3_0.bin
installed license: ACE-08G-LIC
Hardware Cisco ACE (slot: 2) cpu info: number of cpu(s): 2 cpu type:
SiByte cpu: 0, model: SiByte SB1 V0.2, speed: 700 MHz cpu: 1, model:
SiByte SB1 V0.2, speed: 700 MHz memory info: total: 954976 kB, free:
219224 kB shared: 0 kB, buffers: 5380 kB, cached 0 kB cf info:
filesystem: /dev/cf total: 1014624 kB, used: 391760 kB, available: 622864
kB
last boot reason: NP 1 Failed : Nitrox Crash Detected configuration
register: 0x1AR-BUE-HY-ACE1 kernel uptime is 154 days 20 hours
47 minute(s) 40 second(s)
Blogs and organic groups at http://www.ccie.net
Received on Mon Oct 28 2013 - 15:19:39 ART
This archive was generated by hypermail 2.2.0 : Fri Nov 01 2013 - 07:35:39 ART