Check this:
https://supportforums.cisco.com/thread/212125
On some Catalyst switches, having the CPU between 50% and 60% is normal.
Regards,
Antonio Soares, CCIE #18473 (R&S/SP)
amsoares_at_netcabo.pt
http://www.ccie18473.net
-----Original Message-----
From: nobody_at_groupstudy.com [mailto:nobody_at_groupstudy.com] On Behalf Of
Sampath Weerasinghe
Sent: segunda-feira, 28 de Outubro de 2013 12:46
To: Cisco certification
Subject: Any advice?
Hi friends
What could be the reason for high cpu utilization on my company switch?
show proc cpu sorted 5min
show proc cpu sorted 5min
CPU utilization for five seconds: 59%/37%; one minute: 60%; five minutes:
72%
PID Runtime(ms) Invoked uSecs 5Sec 1Min 5Min TTY Process
84 5285196 996140 5305 6.39% 5.91% 6.40% 0 HLFM
address lea
141 4953047 1238685 3998 2.39% 2.67% 4.10% 0 Hulc LED
Process
142 2836984 33179 85505 3.67% 3.81% 3.74% 0 HL3U bkgrd
proce
71 922098 1926258 478 1.75% 1.69% 1.35% 0 Fifo Error
Detec
104 600638 45169 13297 0.79% 0.79% 0.77% 0 hpm
counter proc
88 366294 4468 81981 0.00% 0.51% 0.46% 0 HULC Tcam
Memory
353 217372 68982 3151 0.00% 0.21% 0.35% 0 SNMP
ENGINE
show ver
System image file is "flash:c3560-ipservicesk9-mz.122-58.SE2
show proc cpu his
555555555666665555555555555555555566666666665555555555555555
666666666222225555599999666666666622222222228888866666555555
100
90
80
70
60 **********************************************************
50 **********************************************************
40 **********************************************************
30 **********************************************************
20 **********************************************************
10 **********************************************************
0....5....1....1....2....2....3....3....4....4....5....5....6
0 5 0 5 0 5 0 5 0 5 0
CPU% per second (last 60 seconds)
666999989996676666766567656676659765667656676656756667565677
201010090110371001530917090265493019115093251090390316909311
100
90 *######* *
80 *######* * * * * * * * *
70 #######* * * * ** ** * * * *
60 ##########################################################
50 ##########################################################
40 ##########################################################
30 ##########################################################
20 ##########################################################
10 ##########################################################
0....5....1....1....2....2....3....3....4....4....5....5....6
0 5 0 5 0 5 0 5 0 5 0
CPU% per minute (last 60 minutes)
* = maximum CPU% # = average CPU%
1
989909999999
267909547892
100 ***** ***
90 *******#####
80 ****#**#####
70 ***#########
60 ############
50 ############
40 ############
30 ############
20 ############
10 ############
0....5....1....1....2....2....3....3....4....4....5....5....6....6....7..
0 5 0 5 0 5 0 5 0 5 0 5
0
CPU% per hour (last 72 hours)
* = maximum CPU% # = average CPU%
show ip protocols
*** IP Routing is NSF aware ***
-Sam
Blogs and organic groups at http://www.ccie.net
Received on Mon Oct 28 2013 - 14:58:10 ART
This archive was generated by hypermail 2.2.0 : Fri Nov 01 2013 - 07:35:39 ART