Re: frame map ipv6

You need to map both global unicast and link local ipv6 addresses

;)

On Tue, Oct 8, 2013 at 1:33 PM, <dls152_at_cox.net> wrote:

> This is what I am getting on return packet from debug frame-relay pacet.
> Something is wrong with my mapping and I don't know what.
>
> Mar 1 02:02:16.007: Serial2/0:Encaps failed--no map entry link 79(IPV6)
> *Mar 1 02:02:29.939: Serial2/0(i): dlci 100(0x1841), pkt type 0x86DD,
> datagramsize 84
> *Mar 1 02:02:36.147: Serial2/0(o): dlci 100(0x1841), pkt type
> 0x86DD(IPV6), dat
>
> ---- dls152_at_cox.net wrote:
> > Here is the output from debug ipv6 icmp. Ping is reaching from R1 to R2
> but not making it back. This is only happening when I use frame-relay
> mapping command.
> >
> > R2
> >
> > ar 1 01:02:11.655: ICMPv6: Sending echo request to 2001::5.
> > *Mar 1 01:02:13.659: ICMPv6: Sending echo request to 2001::5.
> > *Mar 1 01:02:15.659: ICMPv6: Sending echo request to 2001::5.
> > *Mar 1 01:02:17.659: ICMPv6: Sending echo request to 2001::5.
> > *Mar 1 01:02:19.659: ICMPv6: Sending echo request to 2001::5.
> >
> > R1
> >
> > 1 00:59:23.023: ICMPv6: Received echo request from 2011:3:3:3::7
> > *Mar 1 00:59:23.023: ICMPv6: Sending echo reply to 2011:3:3:3::7
> > *Mar 1 00:59:25.023: ICMPv6: Received echo request from 2011:3:3:3::7
> > *Mar 1 00:59:25.023: ICMPv6: Sending echo reply to 2011:3:3:3::7
> > *Mar 1 00:59:27.023: ICMPv6: Received echo request from 2011:3:3:3::7
> > *Mar 1 00:59:27.023: ICMPv6: Sending echo reply to 2011:3:3:3::7
> >
> > ---- dls152_at_cox.net wrote:
> > > Hello,
> > >
> > > I am trying to figure out why I can't ping between two routers running
> OSPF v3. I am trying to map ipv6 between 2 frame-relay links. The ospf v3
> neighbors are coming up but I can't ping remote loopback (2001::5). Any
> ideas? I know it has to do something with my mapping but I can't figure it
> out.
> > >
> > >
> > > R1
> > >
> > > interface Serial2/0
> > > no ip address
> > > encapsulation frame-relay
> > > ipv6 address 2011:3:3:3::5/64
> > > ipv6 address FE80::5 link-local
> > > ipv6 ospf neighbor FE80::7
> > > ipv6 ospf 100 area 0
> > > no keepalive
> > > serial restart-delay 0
> > > frame-relay map ipv6 FE80::5 100
> > > frame-relay map ipv6 FE80::7 100
> > >
> > > Neighbor ID Pri State Dead Time Interface ID
> Interface
> > > 2.2.2.2 1 FULL/DR 00:01:30 5 Serial2/0
> > >
> > > R2
> > >
> > > interface Serial1/0
> > > no ip address
> > > encapsulation frame-relay
> > > ipv6 address 2011:3:3:3::7/64
> > > ipv6 address FE80::7 link-local
> > > ipv6 ospf neighbor FE80::5
> > > ipv6 ospf 100 area 0
> > > no keepalive
> > > serial restart-delay 0
> > > frame-relay map ipv6 FE80::5 100
> > > frame-relay map ipv6 FE80::7 100
> > >
> > >
> > > R2#sh ipv6 route
> > > IPv6 Routing Table - 5 entries
> > > Codes: C - Connected, L - Local, S - Static, R - RIP, B - BGP
> > > U - Per-user Static route
> > > I1 - ISIS L1, I2 - ISIS L2, IA - ISIS interarea, IS - ISIS
> summary
> > > O - OSPF intra, OI - OSPF inter, OE1 - OSPF ext 1, OE2 - OSPF
> ext 2
> > > ON1 - OSPF NSSA ext 1, ON2 - OSPF NSSA ext 2
> > > O 2001::5/128 [110/64]
> > > via FE80::5, Serial1/0
> > > C 2011:3:3:3::/64 [0/0]
> > > via ::, Serial1/0
> > > L 2011:3:3:3::7/128 [0/0]
> > > via ::, Serial1/0
> > > L FE80::/10 [0/0]
> > > via ::, Null0
> > > L FF00::/8 [0/0]
> > > via ::, Null0
>
>
> Blogs and organic groups at http://www.ccie.net
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html

Blogs and organic groups at http://www.ccie.net
Received on Tue Oct 08 2013 - 14:23:37 ART