Re: asa 8.2 to 8.3 config conversion

Throw the image and let it fly? LOL - Have TAC on the line and ready. Get
a 5505 a sim it up. Better to be safe than sorry.

On Tue, Aug 27, 2013 at 8:55 AM, Ryan West <rwest_at_zyedge.com> wrote:

> Might want to try this one -
>
> http://www.tunnelsup.com/nat-converter
>
> that should get you into 8.3+, but if you're planning on running 9.x, you
> may want to run 8.4 first and then switch to 9.x and let any other
> conversions take place there.
>
> Also, if you do use the ASA to upgrade from 8.2 to 8.3 and you're running
> any remote access VPN's, be prepared for them to break. It's usually an
> out of order NAT and a quick fix.
>
> -ryan
>
> -----Original Message-----
> From: nobody_at_groupstudy.com [mailto:nobody_at_groupstudy.com] On Behalf Of
> Sadiq Yakasai
> Sent: Tuesday, August 27, 2013 11:24 AM
> To: Tauseef Khan
> Cc: Cisco certification
> Subject: Re: asa 8.2 to 8.3 config conversion
>
> Sure np.
>
> One little observation though - the FWSM does not use 8.x software release
> train though .... 8.x is exclusive to ASA. FWSM latest train stops on 4.x.
>
> Back to your query though; you might want to try converting FWSM-> ASA pre
> 8.3 -> ASA 8.3+
>
> Would that work?
>
>
> On Tue, Aug 27, 2013 at 4:13 PM, Tauseef Khan <tasneemjan_at_googlemail.com
> >wrote:
>
> > thanks for the help but its a FWSM to ASA migration.
> >
> > Kind regards
> >
> > Tauseef
> > mobile: +44 7837209187
> >
> >
> > On 27 August 2013 15:54, Sadiq Yakasai <sadiqtanko_at_gmail.com> wrote:
> >
> >> You do not have to 'convert' the configuration. Just stick the new
> >> image on the firewall(s) and boot them up. The configuration should
> >> pretty much convert itself.
> >>
> >> PS: Note that NAT exemption is no more available in 8.3+ and is
> >> replaced by Identity NAT, so keep an eye out for that! I cant think
> >> of anything else you should worry about at the moment.
> >>
> >> Hope that helps abit.
> >>
> >> Sadiq
> >>
> >>
> >> On Tue, Aug 27, 2013 at 3:46 PM, Tauseef Khan <
> tasneemjan_at_googlemail.com>wrote:
> >>
> >>> Does any one know if there there a script available to convert ASA
> >>> 8.2 to post 8.3 configs Kind regards
> >>>
> >>> Tauseef
> >>> mobile: +44 7837209187
> >>>
> >>>
> >>> Blogs and organic groups at http://www.ccie.net
> >>>
> >>> ____________________________________________________________________
> >>> ___ Subscription information may be found at:
> >>> http://www.groupstudy.com/list/CCIELab.html
> >>>
> >>>
> >>>
> >>>
> >>>
> >>>
> >>>
> >>>
> >>
> >>
> >> --
> >> CCIEx2 (R&S|Sec) #19963
> >>
> >
> >
>
>
> --
> CCIEx2 (R&S|Sec) #19963
>
>
> Blogs and organic groups at http://www.ccie.net
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
>
>
> Blogs and organic groups at http://www.ccie.net
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html

Blogs and organic groups at http://www.ccie.net
Received on Tue Aug 27 2013 - 09:24:20 ART