Hi Mathew,
I haven't done too much within EEM, but I'm sure plenty of the other experts
here could lend some advice on that. If the main issue is to overcome the
flapping, I think trying to use a tracked object with a delay coming back up
is the path I'd investigate.
Sent from my iPhone
On 13 Aug 2013, at 01:20 p.m., Mathew <mathewfer_at_gmail.com> wrote:
> Hi Mohamad/Pete,
>
> Thanks for both relies.
>
> In fact, I want to avoid using IP SLA tracking - due to some reasons.
>
> I am thinking of using the timer and interface status checks in EEM.
>
> Is this still possible with EEM?
>
> Mathew
>
> On Tuesday, August 13, 2013, Petesccie wrote:
>> Hi Matthew,
>> You could possibly try use EEM to track the ip reacability being used for
bgp peer, and maybe put a delay on the track coming back up. Then reference
the track object number in your EEM. Might help...
>>
>> Rgds,
>> Pete
>>
>> Sent from my iPhone
>>
>> On 13 Aug 2013, at 12:52 p.m., Mathew <mathewfer_at_gmail.com> wrote:
>>
>> > Hi,
>> >
>> > I tested two EEM applet configs:
>> >
>> > - One check for syslog for an interface down and CLI to shut down BGP
peer.
>> > - Second one to no shut the BGP peer when syslog entry is seen with
>> > interface up.
>> >
>> > In fact the interface that I want check is NOT being used for this BGP
>> > peering so there is no way to do it with BGP configuration.
>> >
>> > The above two EEM configs works but the issue is that when this
interface
>> > start to flap, EEM keep shutting and no-shutting BGP peer. I want to
avoid
>> > this as it results in BGP flap.
>> >
>> > Has any body tried an EEM solution to keep the BGP peer shut during an
>> > interface flap?
>> >
>> > I do not mind keeping the BGP shut till interface flapping is over but
how
>> > do we do/detect it with EEM?
>> >
>> > Thanks in advance for your replies.
>> >
>> > Mathew
>> >
>> >
>> > --
>> > Thanks
>> >
>> > Mathew
>> >
>> >
>> > Blogs and organic groups at http://www.ccie.net
>> >
>> > _______________________________________________________________________
>> > Subscription information may be found at:
>> > http://www.groupstudy.com/list/CCIELab.html
>> >
>> >
>> >
>> >
>> >
>> >
>> >
>
>
> --
> Thanks
>
> Mathew
Blogs and organic groups at http://www.ccie.net
Received on Tue Aug 13 2013 - 13:41:55 ART
This archive was generated by hypermail 2.2.0 : Sun Sep 01 2013 - 08:35:50 ART