Re: RIPng UDP port

You can configure it under the routing process.

IPv6 router rip tst
  Port 5021

On Thu, Aug 8, 2013 at 1:11 PM, routingfreak <routingfreak_at_gmail.com> wrote:

> I am not seeing the command which u have mentioned. Which particular
> release r u using . Ca n tell me the significance f this command.
>
>
> On Thu, Aug 8, 2013 at 1:07 AM, Joe Sanchez <marco207p_at_gmail.com> wrote:
>
> > Do you have a link for the documentation?
> >
> > Regards,
> > Joe Sanchez
> >
> > ( please excuse the brevity of this email as it was sent via a mobile
> > device.
> > Please excuse misspelled words or sentence structure.)
> >
> > On Aug 7, 2013, at 11:03 AM, Daniel Barney BriseC1o
> > <daniel.barney.b_at_hotmail.com> wrote:
> >
> > > Guys
> > > I found it! Rip processes do not separate with different rip process
> > labels.
> > > To separate the routing information between two diffent rip label
> > process we
> > must change the port of under de routing process with port port-number
> > multicast-group multicast-address
> > >
> > >
> > > > CC: daniel.barney.b_at_hotmail.com; ccielab_at_groupstudy.com
> > > > From: marco207p_at_gmail.com
> > > > Subject: Re: RIPng UDP port
> > > > Date: Tue, 6 Aug 2013 09:04:07 -0500
> > > > To: narbikk_at_gmail.com
> > > >
> > > > AFAIK, only if you VRF it out.
> > > >
> > > > Regards,
> > > > Joe Sanchez
> > > >
> > > > ( please excuse the brevity of this email as it was sent via a mobile
> > device. Please excuse misspelled words or sentence structure.)
> > > >
> > > > On Aug 6, 2013, at 6:19 AM, Narbik Kocharians <narbikk_at_gmail.com>
> > wrote:
> > > >
> > > > > Daniel,
> > > > >
> > > > > Are you talking about running two different RIPng processes on the
> > same
> > > > > router?
> > > > >
> > > > >
> > > > > On Mon, Aug 5, 2013 at 6:38 PM, Daniel Barney Briseqo <
> > > > > daniel.barney.b_at_hotmail.com> wrote:
> > > > >
> > > > >> Hello every one,A couple of weeks ago I read about RIPng, Today
> > while
> > > > >> doing a lab, a doubt came to me and I could find the reference
> > back. I
> > was
> > > > >> hoping you guys can help me.
> > > > >> When having two different RIPng labels, Do we need to change de
> udp
> > port
> > > > >> 521
> > > > >> for one routing process in order to work? If yes, how can we
> archive
> > this
> > > > >> and
> > > > >> if possible could you send me the link reference please
> > > > >> Thank you :)Daniel Barney
> > > > >>
> > > > >>
> > > > >> Blogs and organic groups at http://www.ccie.net
> > > > >>
> > > > >>
> > _______________________________________________________________________
> > > > >> Subscription information may be found at:
> > > > >> http://www.groupstudy.com/list/CCIELab.html
> > > > >
> > > > >
> > > > > --
> > > > > *Narbik Kocharians
> > > > > *CCSI#30832, CCIE# 12410 (R&S, SP, Security)
> > > > > *www.MicronicsTraining.com* <http://www.micronicstraining.com/>
> > > > > Sr. Technical Instructor
> > > > > YES! We take Cisco Learning Credits!
> > > > > A Cisco Learning Partner
> > > > >
> > > > >
> > > > > Blogs and organic groups at http://www.ccie.net
> > > > >
> > > > >
> > _______________________________________________________________________
> > > > > Subscription information may be found at:
> > > > > http://www.groupstudy.com/list/CCIELab.html
> >
> >
> > Blogs and organic groups at http://www.ccie.net
> >
> > _______________________________________________________________________
> > Subscription information may be found at:
> > http://www.groupstudy.com/list/CCIELab.html
> >
> >
> >
> >
> >
> >
> >
> >
>
>
> --
> Regards
> Routing Freak CCIE#35889 (SPv3)
>
>
> Blogs and organic groups at http://www.ccie.net
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
>
>
>
>
>
>
>
>

-- 
*Narbik Kocharians
*CCSI#30832, CCIE# 12410 (R&S, SP, Security)
*www.MicronicsTraining.com* <http://www.micronicstraining.com/>
Sr. Technical Instructor
YES! We take Cisco Learning Credits!
A Cisco Learning Partner
Blogs and organic groups at http://www.ccie.net