RE: include/exclude commands

Aren't you just missing the space on the end of the 10 ?

-----Original Message-----
From: nobody_at_groupstudy.com [mailto:nobody_at_groupstudy.com] On Behalf Of marc edwards
Sent: Wednesday, July 10, 2013 3:51 PM
To: Cisco Fanatic
Cc: daniel.dib_at_reaper.nu; ccielab_at_groupstudy.com
Subject: Re: include/exclude commands

Carlos pointed out that the last '|10' essentially wipes out all lines

try 'show int status | ex notconnect|a'

That is about as close as you are gonna get without regex gymnastics

Marc Edwards
CCIE #38259

On Wed, Jul 10, 2013 at 10:58 AM, Cisco Fanatic
<ebay_products_at_hotmail.com>wrote:

> This shows nothing
>
> SW1#show int status | ex not|a|1000|10
>
> -yuri
>
>
> > Date: Wed, 10 Jul 2013 17:47:44 +0200
> > From: daniel.dib_at_reaper.nu
> > To: ccielab_at_groupstudy.com
> > Subject: RE: include/exclude commands
> >
> > How about:
> >
> > sh int status | ex not|a|1000|10
> >
> > Daniel Dib
> >
> > CCIE
> > #37149
> >
> > 2013-07-10 17:31 skrev Cisco Fanatic:
> >
> > > I think what I am
> > asking is that I only need to display interfaces which are
> > > hardcoded
> > as 100Mbps. I am also getting everything else which I don't need.
> > >
> > >
> > SW1#sh int status | i connected|100
> > > Gi2/36 connected 116 full 100
> > >
> > 10/100/1000-TX
> > > Gi2/37 connected 116 a-full a-1000 10/100/1000-TX
> > >
> > Gi2/38 connected 116 full 100
> > > 10/100/1000-TX
> > > Gi2/39 connected 116
> > a-full a-1000
> > > 10/100/1000-TX
> > > Gi2/40 DC1000-4FL-WAP003 connected 220
> > a-full a-1000
> > > 10/100/1000-TX
> > > Gi2/41 DC1fl4ups2 connected 3 a-full
> > a-100
> > > 10/100/1000-TX
> > > Gi2/42 connected 116 a-full a-1000
> > >
> > 10/100/1000-TX
> > > Gi2/43 connected 116 a-full a-1000 10/100/1000-TX
> > >
> > Gi2/44 connected 116 full 100
> > > 10/100/1000-TX
> > > Gi2/45 connected 116
> > full 100
> > > 10/100/1000-TX
> > > Gi2/46 connected 116 full 100
> > >
> > 10/100/1000-TX
> > > Gi2/47 connected 116 a-full a-1000 10/100/1000-TX
> > >
> >
> > >> Date: Wed, 10 Jul 2013 08:09:21 -0700 Subject: Re:
> > >> include/exclude
> > commands From: renorider_at_gmail.com To: ebay_products_at_hotmail.com CC:
> > ccielab_at_groupstudy.com sh int status Marc Edwards CCIE #38259 On
> > Wed, Jul 10, 2013 at 7:59 AM, Cisco Fanatic
> > >
> > >
> > <ebay_products_at_hotmail.com>wrote:
> > >
> > >>> Is there a quick way to figure
> > out which interfaces are configured for speed 100 say instead of
> > running show run command. If I do the include command it also shows
> > interfaces which are not configured with speed 100. Any create ways
> > to do stuff similar to bgp regular expressions :) SW1#sh run | i
> > interface|speed 100 interface GigabitEthernet2/35 interface
> > GigabitEthernet2/36 speed 100 interface GigabitEthernet2/37
> > interface GigabitEthernet2/38 speed 100 interface
> > GigabitEthernet2/39 interface GigabitEthernet2/40 interface
> > GigabitEthernet2/41 interface GigabitEthernet2/42 interface
> > GigabitEthernet2/43 interface GigabitEthernet2/44 speed 100
> > interface
> > GigabitEthernet2/45 speed 100 interface GigabitEthernet2/46 speed
> > 100 interface GigabitEthernet2/47 interface GigabitEthernet2/48
> > interface
> > GigabitEthernet3/1 interface GigabitEthernet3/2 yuri Blogs and
> > organic groups at http://www.ccie.net [1]
> > ____________________________________________________________________
> > ___ Subscription information may be found at:
> > http://www.groupstudy.com/list/CCIELab.html [2]
> > >> Blogs and organic
> > groups at http://www.ccie.net [1]
> > ____________________________________________________________________
> > ___ Subscription information may be found at:
> > http://www.groupstudy.com/list/CCIELab.html [2]
> > >
> > > Blogs and organic
> > groups at http://www.ccie.net [1]
> > >
> > >
> > ____________________________________________________________________
> > ___
> > >
> > Subscription information may be found at:
> > >
> > http://www.groupstudy.com/list/CCIELab.html [2]
> >
> >
> >
> > Links:
> > ------
> > [1]
> > http://www.ccie.net
> > [2] http://www.groupstudy.com/list/CCIELab.html
> >
> >
> > Blogs and organic groups at http://www.ccie.net
> >
> > ____________________________________________________________________
> > ___ Subscription information may be found at:
> > http://www.groupstudy.com/list/CCIELab.html
>
>
> Blogs and organic groups at http://www.ccie.net
>
> ______________________________________________________________________
> _ Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html

Blogs and organic groups at http://www.ccie.net
Received on Wed Jul 10 2013 - 20:09:08 ART