Strange case in dial-peer selection

Hi experts,

Strange case in dial-peer selection, there the configuration, by the way the
dial-peer hunt option is the default

dial-peer voice 63 pots

corlist outgoing pt-default

destination-pattern 92988128

port 0/1/0

forward-digits 7

dial-peer voice 2 pots

corlist outgoing pt-default

destination-pattern 9[2-9]......

port 0/1/2

forward-digits 7

Why if I dial the call will go through dial-peer voice 2!!!

test#sho dialplan number 92988128

Macro Exp.: 92988128

VoiceEncapPeer63

        peer type = voice, system default peer = FALSE, information type =
voice

,

        description = `',

        tag = 63, destination-pattern = `92988128',

        voice reg type = 0, corresponding tag = 0,

        allow watch = FALSE

        answer-address = `', preference=0,

        CLID Restriction = None

        CLID Network Number = `'

        CLID Second Number sent

        CLID Override RDNIS = disabled,

        rtp-ssrc mux = system

        source carrier-id = `', target carrier-id = `',

        source trunk-group-label = `', target trunk-group-label = `',

        numbering Type = `unknown'

        group = 63, Admin state is up, Operation state is up,

        Outbound state is up,

        incoming called-number = `', connections/maximum = 0/unlimited,

        DTMF Relay = disabled,

        URI classes:

            Destination =

        huntstop = disabled,

        in bound application associated: 'DEFAULT'

        out bound application associated: ''

        dnis-map =

        permission :both

        incoming COR list:maximum capability

        outgoing COR list:pt-default

        Translation profile (Incoming):

        Translation profile (Outgoing):

        incoming call blocking:

       translation-profile = `'

        disconnect-cause = `no-service'

        advertise 0x40 capacity_update_timer 25 addrFamily 4 oldAddrFamily 4

        mailbox selection policy: none

        type = pots, prefix = `',

        forward-digits 7

        session-target = `', voice-port = `0/1/0',

        direct-inward-dial = disabled,

        digit_strip = enabled,

        register E.164 number with H323 GK and/or SIP Registrar = TRUE

        fax rate = system, payload size = 20 bytes

        supported-language = ''

        preemption level = `routine'

        bandwidth:

            maximum = 64 KBits/sec, minimum = 64 KBits/sec

        voice class called-number:

            inbound = `', outbound = `'

        dial tone generation after remote onhook = enabled

        mobility=0, snr=, snr_noan=, snr_delay=0, snr_timeout=0

        Time elapsed since last clearing of voice call statistics never

        Connect Time = 3594, Charged Units = 0,

        Successful Calls = 4, Failed Calls = 26, Incomplete Calls = 0

        Accepted Calls = 0, Refused Calls = 0,

        Last Disconnect Cause is "22 ",

        Last Disconnect Text is "no circuit (34)",

        Last Setup Time = 78960278.

        Last Disconnect Time = 76613236.

Matched: 92988128 Digits: 8

Target:

VoiceEncapPeer2

        peer type = voice, system default peer = FALSE, information type =
voice

,

        description = `',

        tag = 2, destination-pattern = `9[2-9]......',

        voice reg type = 0, corresponding tag = 0,

        allow watch = FALSE

        answer-address = `', preference=0,

        CLID Restriction = None

        CLID Network Number = `'

        CLID Second Number sent

        CLID Override RDNIS = disabled,

        rtp-ssrc mux = system

        source carrier-id = `', target carrier-id = `',

        source trunk-group-label = `', target trunk-group-label = `',

        numbering Type = `unknown'

        group = 2, Admin state is up, Operation state is up,

        Outbound state is up,

        incoming called-number = `', connections/maximum = 1/unlimited,

        DTMF Relay = disabled,

        URI classes:

            Destination =

        huntstop = disabled,

        in bound application associated: 'DEFAULT'

        out bound application associated: ''

        dnis-map =

        permission :both

        incoming COR list:maximum capability

        outgoing COR list:pt-default

        Translation profile (Incoming):

        Translation profile (Outgoing):

        incoming call blocking:

        translation-profile = `'

        disconnect-cause = `no-service'

        advertise 0x40 capacity_update_timer 25 addrFamily 4 oldAddrFamily 4

        mailbox selection policy: none

        type = pots, prefix = `',

        forward-digits 7

        session-target = `', voice-port = `0/1/2',

        direct-inward-dial = disabled,

        digit_strip = enabled,

        register E.164 number with H323 GK and/or SIP Registrar = TRUE

        fax rate = system, payload size = 20 bytes

        supported-language = ''

        preemption level = `routine'

        bandwidth:

            maximum = 64 KBits/sec, minimum = 64 KBits/sec

        voice class called-number:

            inbound = `', outbound = `'

        dial tone generation after remote onhook = enabled

        mobility=0, snr=, snr_noan=, snr_delay=0, snr_timeout=0

        Time elapsed since last clearing of voice call statistics never

        Connect Time = 2247016, Charged Units = 0,

        Successful Calls = 229, Failed Calls = 240, Incomplete Calls = 1

        Accepted Calls = 1, Refused Calls = 0,

        Last Disconnect Cause is "22 ",

        Last Disconnect Text is "no circuit (34)",

        Last Setup Time = 78960405.

        Last Disconnect Time = 78799190.

Matched: 92988128 Digits: 2

Target:

Regards,

Amin

Blogs and organic groups at http://www.ccie.net
Received on Tue Apr 16 2013 - 17:13:49 ART