Re: ospf distance

Hi,

You need to enter the RID from which the LSA is coming which I
think is 150.1.3.3? So enter the RID instead of the next-hop and try it
again.

Regards,

Daniel Dib

CCIE #37149

2013-04-15 09:55 skrev
Imran Ali:

> i am trying to use ospf distance command to selectivly
increase the
> distance of ospf route.
>
> i am not sure why it is not
working ,. 192.10.1.0 needs to get ad of 200
>
> SW1#show ip route
>
155.1.0.0/24 is subnetted, 9 subnets
> O IA 155.1.23.0 [110/65] via
155.1.37.3, 00:00:03, FastEthernet1/3
> O IA 155.1.13.0 [110/65] via
155.1.37.3, 00:00:03, FastEthernet1/3
> O IA 155.1.0.0 [110/65] via
155.1.37.3, 00:00:03, FastEthernet1/3
> O IA 155.1.58.0 [110/22] via
155.1.67.6, 00:00:03, FastEthernet1/6
> O IA 155.1.45.0 [110/12] via
155.1.67.6, 00:00:03, FastEthernet1/6
> C 155.1.37.0 is directly
connected, FastEthernet1/3
> C 155.1.79.0 is directly connected,
FastEthernet0/0
> C 155.1.67.0 is directly connected, FastEthernet1/6
>
O IA 155.1.108.0 [110/32] via 155.1.67.6, 00:00:03, FastEthernet1/6
> O*
IA 192.10.1.0/24 *[110/75] via 155.1.37.3, 00:00:03, FastEthernet1/3
>
150.1.0.0/16 is variably subnetted, 5 subnets, 2 masks
> C 150.1.7.0/24
is directly connected, Loopback0
> O IA 150.1.8.8/32
> O IA 150.1.6.6/32
[110/2] via 155.1.67.6, 00:11:27, FastEthernet1/6
> O IA 150.1.3.3/32
[110/2] via 155.1.37.3, 00:11:27, FastEthernet1/3
> O IA 150.1.2.2/32
[110/66] via 155.1.37.3, 00:11:27, FastEthernet1/3
>
>
SW1(config)#access-list 19 permit 192.10.1.0
> SW1(config)#router os 1
>

> SW1(config-router)#distance 200 155.1.37.3 0.0.0.0 19
>
SW1(config-router)#exit
> SW1(config)#exit
>
> SW1#clear ip route *
>

> SW1#show ip route
>
> Gateway of last resort is not set
>
155.1.0.0/24 is subnetted, 9 subnets
> O IA 155.1.23.0 [110/65] via
155.1.37.3, 00:00:07, FastEthernet1/3
> O IA 155.1.13.0 [110/65] via
155.1.37.3, 00:00:07, FastEthernet1/3
> O IA 155.1.0.0 [110/65] via
155.1.37.3, 00:00:07, FastEthernet1/3
> O IA 155.1.58.0 [110/22] via
155.1.67.6, 00:00:07, FastEthernet1/6
> O IA 155.1.45.0 [110/12] via
155.1.67.6, 00:00:07, FastEthernet1/6
> C 155.1.37.0 is directly
connected, FastEthernet1/3
> C 155.1.79.0 is directly connected,
FastEthernet0/0
> C 155.1.67.0 is directly connected, FastEthernet1/6
>
O IA 155.1.108.0 [110/32] via 155.1.67.6, 00:00:07, FastEthernet1/6
> O*
IA 192.10.1.0/24 [110/75]* via 155.1.37.3, 00:00:07, FastEthernet1/3
>
150.1.0.0/16 is variably subnetted, 5 subnets, 2 masks
> C 150.1.7.0/24
is directly connected, Loopback0
> O IA 150.1.8.8/32 [110/23] via
155.1.67.6, 00:00:15, FastEthernet1/6
> O IA 150.1.6.6/32 [110/2] via
155.1.67.6, 00:00:15, FastEthernet1/6
> O IA 150.1.3.3/32 [110/2] via
155.1.37.3, 00:00:15, FastEthernet1/3
> O IA 150.1.2.2/32 [110/66] via
155.1.37.3, 00:00:15, FastEthernet1/3
>
> Reset ALL OSPF processes?
[no]: yes
> SW1#
> *Mar 2 02:45:57.029: %OSPF-5-ADJCHG: Process 1, Nbr
150.1.3.3 on
> FastEthernet1/3 from FULL to DOWN, Neighbor Down:
Interface down or detached
> *Mar 2 02:45:57.033: %OSPF-5-ADJCHG:
Process 1, Nbr 150.1.6.6 on
> FastEthernet1/6 from FULL to DOWN,
Neighbor Down: Interface down or detached
> *Mar 2 02:45:57.037:
%OSPF-5-ADJCHG: Process 1, Nbr 150.1.9.9 on
> FastEthernet0/0 from FULL
to DOWN, Neighbor Down: Interface down or detached
> *Mar 2
02:45:57.485: %OSPF-5-ADJCHG: Process 1, Nbr 150.1.3.3 on
>
FastEthernet1/3 from LOADING to FULL, Loading Done
> *Mar 2
02:45:57.485: %OSPF-5-ADJCHG: Process 1, Nbr 150.1.6.6 on
>
FastEthernet1/6 from LOADING to FULL, Loading Done
> *Mar 2
02:45:57.509: %OSPF-5-ADJCHG: Process 1, Nbr 150.1.9.9 on
>
FastEthernet0/0 from LOADING to FULL, Loading Done
>
> SW1#show ip
route
>
> Gateway of last resort is not set
> 155.1.0.0/24 is
subnetted, 9 subnets
> O IA 155.1.23.0 [110/65] via 155.1.37.3,
00:00:03, FastEthernet1/3
> O IA 155.1.13.0 [110/65] via 155.1.37.3,
00:00:03, FastEthernet1/3
> O IA 155.1.0.0 [110/65] via 155.1.37.3,
00:00:03, FastEthernet1/3
> O IA 155.1.58.0 [110/22] via 155.1.67.6,
00:00:03, FastEthernet1/6
> O IA 155.1.45.0 [110/12] via 155.1.67.6,
00:00:03, FastEthernet1/6
> C 155.1.37.0 is directly connected,
FastEthernet1/3
> C 155.1.79.0 is directly connected, FastEthernet0/0
>
C 155.1.67.0 is directly connected, FastEthernet1/6
> O IA 155.1.108.0
[110/32] via 155.1.67.6, 00:00:03, FastEthernet1/6
> O* IA 192.10.1.0/24
[110/*75] via 155.1.37.3, 00:00:03, FastEthernet1/3
> 150.1.0.0/16 is
variably subnetted, 5 subnets, 2 masks
> C 150.1.7.0/24 is directly
connected, Loopback0
> O IA 150.1.8.8/32 [110/23] via 155.1.67.6,
00:00:04, FastEthernet1/6
> O IA 150.1.6.6/32 [110/2] via 155.1.67.6,
00:00:04, FastEthernet1/6
> O IA 150.1.3.3/32 [110/2] via 155.1.37.3,
00:00:04, FastEthernet1/3
> O IA 150.1.2.2/32 [110/66] via 155.1.37.3,
00:00:04, FastEthernet1/3
> still 110 :(
>
> Blogs and organic groups
at http://www.ccie.net [1]
>
>
Received on Mon Apr 15 2013 - 10:06:55 ART