Re: MQC GTS based policy

I my opinion two option are ok.
If you don't have any restriction you can use one of them.

On 3/22/13, Imran Ali <immrccie_at_gmail.com> wrote:
> are you doing MQC FRTS OR CBTS ?
>
> On Fri, Mar 22, 2013 at 9:55 PM, marc edwards <renorider_at_gmail.com> wrote:
>
>> The way I read 'Router policy should match pvc 305' would defer to option
>> 2.
>>
>> Marc Edwards
>> CCIE #38259
>>
>>
>> On Thu, Mar 21, 2013 at 9:02 AM, ccie99999 <ccie99999_at_gmail.com> wrote:
>> > trying to re-send this.. if someone can help. Thanks.
>> >
>> >
>> > ---------- Forwarded message ----------
>> > From: ccie99999 <ccie99999_at_gmail.com>
>> > Date: Wed, Mar 6, 2013 at 4:57 AM
>> > Subject: MQC GTS based policy
>> > To: Cisco certification <ccielab_at_groupstudy.com>
>> >
>> >
>> > Hi guys,
>> >
>> > in my lab I've to shape to an average rate of 256k with bc and be of
>> 12800
>> > and 6400.
>> > Router policy should match pvc 305.
>> >
>> > I think there are 2 ways to do same thing here.. can you confirm the
>> > end
>> > result is the same ? (at least looks so from my show policy-map inter
>> > command)
>> >
>> > sh policy-map
>> >
>> > *option n.1*
>> >
>> > class-map DLCI_305
>> > match fr-dlci 305
>> >
>> > policy-map POLICY_FR_OUT
>> > class DLCI_305
>> > shape average 256000 12800 6400
>> >
>> > int se1/0
>> > service-policy output POLICY_FR_OUT
>> >
>> > *option n.2*
>> >
>> > policy-map ALL
>> > class class-default
>> > shape average 256000 12800 6400
>> >
>> > map-class frame-relay DLCI_305
>> > service-policy output ALL
>> >
>> > int se1/0
>> > frame-relay interface-dlci 305
>> > class DLCI_305
>> >
>> >
>> > *VERIFICATION option 1*
>> >
>> > Rack1R3#show policy-map inter se1/0
>> >
>> > Serial1/0
>> >
>> > Service-policy output: POLICY_FR_OUT
>> >
>> > Class-map: DLCI_305 (match-all)
>> > 3 packets, 384 bytes
>> > 5 minute offered rate 0 bps, drop rate 0 bps
>> > Match: fr-dlci 305
>> > Traffic Shaping
>> > Target/Average Byte Sustain Excess Interval
>> Increment
>> > Rate Limit bits/int bits/int (ms)
>> > (bytes)
>> > 256000/256000 2400 12800 6400 50 1600
>> >
>> > Adapt Queue Packets Bytes Packets Bytes
>> > Shaping
>> > Active Depth Delayed Delayed Active
>> > - 0 3 384 0 0 no
>> >
>> > Class-map: class-default (match-any)
>> > 1 packets, 14 bytes
>> > 5 minute offered rate 0 bps, drop rate 0 bps
>> > Match: any
>> >
>> > *VERIFICATION option 2*
>> >
>> > Rack1R3#show policy-map inter se1/0
>> > Serial1/0: DLCI 305 -
>> >
>> > Service-policy output: ALL
>> >
>> > Class-map: class-default (match-any)
>> > 1 packets, 84 bytes
>> > 5 minute offered rate 0 bps, drop rate 0 bps
>> > Match: any
>> > Traffic Shaping
>> > Target/Average Byte Sustain Excess Interval
>> Increment
>> > Rate Limit bits/int bits/int (ms)
>> > (bytes)
>> > 256000/256000 2400 12800 6400 50 1600
>> >
>> > Adapt Queue Packets Bytes Packets Bytes
>> > Shaping
>> > Active Depth Delayed Delayed Active
>> > - 0 1 84 0 0 no
>> >
>> > thanks in advance!
>> >
>> >
>> > --
>> > @ccie99999
>> > https://twitter.com/ccie99999
>> >
>> >
>> >
>> > --
>> > @ccie99999
>> > https://twitter.com/ccie99999
>> >
>> >
>> > Blogs and organic groups at http://www.ccie.net
>> >
>> > _______________________________________________________________________
>> > Subscription information may be found at:
>> > http://www.groupstudy.com/list/CCIELab.html
>>
>>
>> Blogs and organic groups at http://www.ccie.net
>>
>> _______________________________________________________________________
>> Subscription information may be found at:
>> http://www.groupstudy.com/list/CCIELab.html
>
>
> Blogs and organic groups at http://www.ccie.net
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
>
>
>
>
>
>
>
>

-- 
Krzysiek
Blogs and organic groups at http://www.ccie.net