Re: BGP on XR

Hi,

You're peering in VPNv4 AF, however you're with the generic command "show
bgp summary" you're only looking for IPv4 unicast sessions. Since you
aren't peering IPv4 unicast you won't see anything.

Try:

show bgp vpnv4 unicast summary

RP/0/0/CPU0:XR2#show bgp vpnv4 unicast summary
Mon Mar 25 17:41:50.397 SGT
BGP router identifier 20.20.20.20, local AS number 100
BGP generic scan interval 60 secs
BGP table state: Active
Table ID: 0x0 RD version: 4
BGP main routing table version 1
BGP scan interval 60 secs

BGP is operating in STANDALONE mode.

Process RcvTblVer bRIB/RIB LabelVer ImportVer SendTblVer
 StandbyVer
Speaker 1 0 0 0 0
    0

Neighbor Spk AS MsgRcvd MsgSent TblVer InQ OutQ Up/Down
 St/PfxRcd
19.19.19.19 0 100 0 0 0 0 0 00:00:00 Active

Thanks,
Steve Di Bias- CCIE #32840

On Fri, Mar 29, 2013 at 6:22 AM, amine benali <benali.amin_at_gmail.com> wrote:

> HI ,
>
> I m a bit confused about the BGP status according to the output below : '
>
> RP/0/0/CPU0:XR1#sh bgp sessions
> Fri Mar 29 13:15:48.320 UTC
>
> Neighbor VRF Spk AS InQ OutQ NBRState
> NSRState
> 20.20.20.20 default 0 100 0 0 Established
> -
> RP/0/0/CPU0:XR1#
>
>
> RP/0/0/CPU0:XR1#sh bgp summary
> Fri Mar 29 13:16:13.410 UTC
> % None of the requested address families are configured.
> RP/0/0/CPU0:XR1#
>
> config is the following
> peer 1
> ----------
> router bgp 100
> address-family vpnv4 unicast
> !
> neighbor 20.20.20.20
> remote-as 100
> update-source Loopback0
> address-family vpnv4 unicast
>
>
> peer 2
> ----------
> router bgp 100
> address-family vpnv4 unicast
> !
> neighbor 19.19.19.19
> remote-as 100
> update-source Loopback0
> address-family vpnv4 unicast
> !
>
> can someone calrify ??
>
>
> Blogs and organic groups at http://www.ccie.net
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html

Blogs and organic groups at http://www.ccie.net
Received on Fri Mar 29 2013 - 08:19:19 ART