RE: ip pim bsr

Hi all
Thanks for the kind replies
I enabled the debug ip pim bsr and I did receive output
*Mar 17 09:56:08.429: PIM-BSR(0): bootstrap (9.9.0.7) on non-RPF path FastEthernet0/0.35 or from non-RPF neighbor 9.9.56.6 discarded
Now I can see that there is RPF failure and I know that one of the solutions is to configure ip mroute , but what i am a little bit confused about is that the R5 (the router i am taking the output from ) is facing the issue from the two connection he has
non-RPF path FastEthernet0/0.35
non-RPF neighbor 9.9.56.6 discarded

Anyway , I have added R5(config)#ip mroute 9.9.0.7 255.255.255.255 9.9.35.3 and got the below message
*Mar 17 09:59:11.453: %LINEPROTO-5-UPDOWN: Line protocol on Interface Tunnel0, changed state to up

R5#sh ip pim rp mapp
PIM Group-to-RP Mappings

Group(s) 239.255.0.0/16
  RP 9.9.0.7 (?), v2
    Info source: 9.9.0.7 (?), via bootstrap, priority 0, holdtime 150
         Uptime: 00:00:08, expires: 00:02:19

BR,

> CC: ccielab_at_groupstudy.com
> From: mothafungla_at_gmail.com
> Subject: Re: ip pim bsr
> Date: Sat, 16 Mar 2013 13:30:37 +0000
> To: eng_mssk_at_hotmail.com
>
> debug ip pim bsr
>
> Does it receive anything?
>
> Check rpf
>
> --
> BR
>
> Tony
>
> Sent from my iPhone on 3
>
> On 16 Mar 2013, at 09:51, Mohammad Khalil <eng_mssk_at_hotmail.com> wrote:
>
> > Hi all , 6 routers connected to each other (not full mesh) but configured in the same OSPF area (area 0)
> > I have configured the edge router as a BSR and rp-candidate
> > The routers on the other edge which does not have direct connectivity to the BSR does not learn the rp mapping ?
> >
> > What could be the issue?
> >
> >
> > Blogs and organic groups at http://www.ccie.net
> >
> > _______________________________________________________________________
> > Subscription information may be found at:
> > http://www.groupstudy.com/list/CCIELab.html

Blogs and organic groups at http://www.ccie.net
Received on Sun Mar 17 2013 - 10:08:24 ART