RE: Router on a stick question

Can you add int vlan 67 on Switch 2 as well and see which side is pingable
from there? Perhaps, create the following int on SW2 and try to ping Router
and SW1 both to get an idea which side is failing. SW2:
interface Vlan67
 ip address 155.15.67.10 255.255.255.0
   Thanks,Kapil Also, > Date: Fri, 15 Mar 2013 10:54:32 -0700
> Subject: Re: Router on a stick question
> From: coolmaneesh_at_gmail.com
> To: jb.poplawski_at_gmail.com
> CC: ccielab_at_groupstudy.com
>
> Auto-negotiated
>
> Rack1SW1#show interface trunk
>
> Port Mode Encapsulation Status Native vlan
> Et2/0 desirable n-802.1q trunking 1
> Et2/1 desirable n-802.1q trunking 1
> Et2/2 desirable n-802.1q trunking 1
> Et3/0 desirable n-802.1q trunking 1
> Et3/1 desirable n-802.1q trunking 1
> Et3/2 desirable n-802.1q trunking 1
> Et4/0 desirable n-isl trunking 1
> Et4/1 desirable n-isl trunking 1
> Et4/2 desirable n-isl trunking 1
>
> Port Vlans allowed on trunk
> Et2/0 1-4094
> Et2/1 1-4094
> Et2/2 1-4094
> Et3/0 1-4094
> Et3/1 1-4094
> Et3/2 1-4094
> Et4/0 1-4094
> Et4/1 1-4094
> Et4/2 1-4094
>
> Port Vlans allowed and active in management domain
> Et2/0 1,67,79,100
> Et2/1 1,67,79,100
> Et2/2 1,67,79,100
> Et3/0 1,67,79,100
> Et3/1 1,67,79,100
> Et3/2 1,67,79,100
> Et4/0 1,67,79,100
> Et4/1 1,67,79,100
> Et4/2 1,67,79,100
>
> Port Vlans in spanning tree forwarding state and not pruned
> Et2/0 1,67,79,100
> Et2/1 none
> Et2/2 none
> Et3/0 none
> Et3/1 none
> Et3/2 none
> Et4/0 1,67,79,100
> Et4/1 1,67,79,100
> Et4/2 1,67,79,100
>
>
> On Fri, Mar 15, 2013 at 10:51 AM, JB Poplawski
<jb.poplawski_at_gmail.com>wrote:
>
> > Interface up on the switch? Is Switch A supposed to trunk somewhere, I
> > don't see it.
> >
> >
> > On Fri, Mar 15, 2013 at 12:46 PM, Maneesh Chawla
<coolmaneesh_at_gmail.com>wrote:
> >
> >> Topo
> >> -------
> >>
> >> .7 .6
> >> SW1------------------------------R6
> >>
> >> (155.15.67.0/24 vlan 67)
> >>
> >>
> >> Physical topo
> >> --------------------
> >>
> >>
> >>
SW1-(e2/0-2)-------------------(e2/0-2)-SW2-(e1/2)-------------------(e0/0)-R
6
> >>
> >>
> >> I have attached below the configs. The example is taken from INE videos
> >> module 1 lesson 1.
> >>
> >> not able to ping from R6 to SW1.
> >> Not sure what am I missing here. Can the gurus help out ?
> >>
> >> Attached the configs.
> >> R6
> >> -------
> >>
> >> Rack1R6#show run
> >> Building configuration...
> >>
> >> Current configuration : 1414 bytes
> >> !
> >> ! Last configuration change at 18:19:48 CET Fri Mar 15 2013
> >> !
> >> version 12.4
> >> service timestamps debug datetime msec
> >> service timestamps log datetime msec
> >> no service password-encryption
> >> !
> >> hostname Rack1R6
> >> !
> >> boot-start-marker
> >> boot-end-marker
> >> !
> >> !
> >> no aaa new-model
> >> clock timezone CET 1
> >> mmi polling-interval 60
> >> no mmi auto-configure
> >> no mmi pvc
> >> mmi snmp-timeout 180
> >> ip source-route
> >> ip auth-proxy max-login-attempts 5
> >> ip admission max-login-attempts 5
> >> !
> >> !
> >> !
> >> !
> >> ip cef
> >> no ip domain lookup
> >> no ipv6 traffic interface-statistics
> >> no ipv6 cef
> >> !
> >> multilink bundle-name authenticated
> >> !
> >> !
> >> !
> >> !
> >> !
> >> !
> >> !
> >> !
> >> !
> >> redundancy
> >> !
> >> !
> >> !
> >> !
> >> !
> >> !
> >> !
> >> !
> >> !
> >> interface Ethernet0/0
> >> no ip address
> >> !
> >> interface Ethernet0/0.67
> >> encapsulation dot1Q 67
> >> ip address 155.15.67.6 255.255.255.0
> >> !
> >> interface Ethernet0/1
> >> no ip address
> >> !
> >> interface Ethernet0/2
> >> no ip address
> >> !
> >> interface Ethernet0/3
> >> no ip address
> >> !
> >> interface Serial1/0
> >> no ip address
> >> serial restart-delay 0
> >> !
> >> interface Serial1/1
> >> no ip address
> >> serial restart-delay 0
> >> !
> >> interface Serial1/2
> >> no ip address
> >> serial restart-delay 0
> >> !
> >> interface Serial1/3
> >> no ip address
> >> serial restart-delay 0
> >> !
> >> ip forward-protocol nd
> >> !
> >> !
> >> no ip http server
> >> no ip http secure-server
> >> !
> >> !
> >> !
> >> !
> >> !
> >> !
> >> !
> >> control-plane
> >> !
> >> !
> >> line con 0
> >> exec-timeout 0 0
> >> privilege level 15
> >> logging synchronous
> >> line aux 0
> >> exec-timeout 0 0
> >> privilege level 15
> >> line vty 0 4
> >> login
> >> transport input all
> >> !
> >> exception data-corruption buffer truncate
> >> end
> >>
> >>
> >>
> >>
> >> sw1
> >> -------
> >>
> >>
> >> Rack1SW1#show run
> >> Building configuration...
> >>
> >> Current configuration : 1597 bytes
> >> !
> >> ! Last configuration change at 18:10:16 CET Fri Mar 15 2013
> >> !
> >> version 15.0
> >> service timestamps debug datetime msec
> >> service timestamps log datetime msec
> >> no service password-encryption
> >> !
> >> hostname Rack1SW1
> >> !
> >> boot-start-marker
> >> boot-end-marker
> >> !
> >> !
> >> !
> >> no aaa new-model
> >> clock timezone CET 1
> >> !
> >> ip cef
> >> no ip domain-lookup
> >> !
> >> no ipv6 cef
> >> !
> >> !
> >> !
> >> spanning-tree mode pvst
> >> spanning-tree extend system-id
> >> !
> >> vlan internal allocation policy ascending
> >> !
> >> !
> >> !
> >> !
> >> !
> >> !
> >> !
> >> interface Ethernet0/0
> >> duplex auto
> >> !
> >> interface Ethernet0/1
> >> duplex auto
> >> !
> >> interface Ethernet0/2
> >> duplex auto
> >> !
> >> interface Ethernet0/3
> >> no switchport
> >> ip address 155.15.37.7 255.255.255.0
> >> duplex auto
> >> !
> >> interface Ethernet1/0
> >> duplex auto
> >> !
> >> interface Ethernet1/1
> >> duplex auto
> >> !
> >> interface Ethernet1/2
> >> duplex auto
> >> !
> >> interface Ethernet1/3
> >> duplex auto
> >> !
> >> interface Ethernet2/0
> >> duplex auto
> >> !
> >> interface Ethernet2/1
> >> duplex auto
> >> !
> >> interface Ethernet2/2
> >> duplex auto
> >> !
> >> interface Ethernet2/3
> >> duplex auto
> >> !
> >> interface Ethernet3/0
> >> duplex auto
> >> !
> >> interface Ethernet3/1
> >> duplex auto
> >> !
> >> interface Ethernet3/2
> >> duplex auto
> >> !
> >> interface Ethernet3/3
> >> duplex auto
> >> !
> >> interface Ethernet4/0
> >> duplex auto
> >> !
> >> interface Ethernet4/1
> >> duplex auto
> >> !
> >> interface Ethernet4/2
> >> duplex auto
> >> !
> >> interface Ethernet4/3
> >> duplex auto
> >> !
> >> interface Vlan1
> >> no ip address
> >> shutdown
> >> !
> >> interface Vlan67
> >> ip address 155.15.67.7 255.255.255.0
> >> !
> >> interface Vlan79
> >> ip address 155.15.79.7 255.255.255.0
> >> !
> >> !
> >> ip forward-protocol nd
> >> no ip http server
> >> !
> >> !
> >> !
> >> !
> >> !
> >> control-plane
> >> !
> >> !
> >> line con 0
> >> exec-timeout 0 0
> >> privilege level 15
> >> logging synchronous
> >> line aux 0
> >> line vty 0 4
> >> login
> >> transport input all
> >> !
> >> end
> >>
> >>
> >>
> >> sw2
> >> -------
> >>
> >> Rack1SW2#show run
> >> Building configuration...
> >>
> >> Current configuration : 1674 bytes
> >> !
> >> ! Last configuration change at 17:35:16 CET Fri Mar 15 2013
> >> !
> >> version 15.0
> >> service timestamps debug datetime msec
> >> service timestamps log datetime msec
> >> no service password-encryption
> >> !
> >> hostname Rack1SW2
> >> !
> >> boot-start-marker
> >> boot-end-marker
> >> !
> >> !
> >> !
> >> no aaa new-model
> >> clock timezone CET 1
> >> !
> >> ip cef
> >> no ip domain-lookup
> >> !
> >> no ipv6 cef
> >> !
> >> !
> >> !
> >> spanning-tree mode pvst
> >> spanning-tree extend system-id
> >> !
> >> vlan internal allocation policy ascending
> >> !
> >> !
> >> !
> >> !
> >> !
> >> !
> >> !
> >> interface Ethernet0/0
> >> duplex auto
> >> !
> >> interface Ethernet0/1
> >> duplex auto
> >> !
> >> interface Ethernet0/2
> >> duplex auto
> >> !
> >> interface Ethernet0/3
> >> duplex auto
> >> !
> >> interface Ethernet1/0
> >> duplex auto
> >> !
> >> interface Ethernet1/1
> >> duplex auto
> >> !
> >> interface Ethernet1/2
> >> switchport trunk encapsulation dot1q
> >> switchport mode trunk
> >> duplex auto
> >> !
> >> interface Ethernet1/3
> >> duplex auto
> >> !
> >> interface Ethernet2/0
> >> switchport trunk encapsulation dot1q
> >> switchport mode trunk
> >> duplex auto
> >> !
> >> interface Ethernet2/1
> >> switchport trunk encapsulation dot1q
> >> switchport mode trunk
> >> duplex auto
> >> !
> >> interface Ethernet2/2
> >> switchport trunk encapsulation dot1q
> >> switchport mode trunk
> >> duplex auto
> >> !
> >> interface Ethernet2/3
> >> duplex auto
> >> !
> >> interface Ethernet3/0
> >> duplex auto
> >> !
> >> interface Ethernet3/1
> >> duplex auto
> >> !
> >> interface Ethernet3/2
> >> duplex auto
> >> !
> >> interface Ethernet3/3
> >> duplex auto
> >> !
> >> interface Ethernet4/0
> >> duplex auto
> >> !
> >> interface Ethernet4/1
> >> duplex auto
> >> !
> >> interface Ethernet4/2
> >> duplex auto
> >> !
> >> interface Ethernet4/3
> >> duplex auto
> >> !
> >> interface Vlan1
> >> no ip address
> >> shutdown
> >> !
> >> !
> >> ip forward-protocol nd
> >> no ip http server
> >> !
> >> !
> >> !
> >> !
> >> !
> >> control-plane
> >> !
> >> !
> >> line con 0
> >> exec-timeout 0 0
> >> privilege level 15
> >> logging synchronous
> >> line aux 0
> >> line vty 0 4
> >> login
> >> transport input all
> >> !
> >> end
> >>
> >>
> >> Blogs and organic groups at http://www.ccie.net
> >>
> >> _______________________________________________________________________
> >> Subscription information may be found at:
> >> http://www.groupstudy.com/list/CCIELab.html
>
>
> Blogs and organic groups at http://www.ccie.net
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html

Blogs and organic groups at http://www.ccie.net
Received on Fri Mar 15 2013 - 20:58:58 ART