Re: Ospf Point-to-point to multipoint

A fram relay map from spoke to spoke is not allowed.
I do see the routes, i cant ping spoke to spoke.

Daniel Barney Briseqo
"El zltimo minuto tambiin tiene 60 segundos"
daniel.barney.b_at_hotmail.com

On Mar 7, 2013, at 4:03 PM, Petesccie wrote:

> Show frame map - I'd say you need a mapping for the route?
>
> Not split horizon (you can see the route - right?) I'm not sure there even
is split horizon for ospf as its a database.
>
>
> Sent from my iPhone
>
> On 7 Mar 2013, at 21:53, Daniel Barney Briseqo <daniel.barney.b_at_hotmail.com>
wrote:
>
>> Hello there.
>> In this topology, over frame relay:
>>
>> R1-----------R2
>> |
>> |
>> R3
>>
>> -I only have frame relay maps from, R1 to R2 and from R1 to R3.
>> -Frame relay between the spokes is not allowed
>> -The spokes must be ospf network type point-to-point and the hub
multipoint.
>> -I have changed the hello timers, so neighbors are UP.
>>
>> I have connectivity from hub to both spokes, but I dont have from spoke to
>> spoke.
>> Is this a split horizon issue?
>>
>> Rutes are being propagated well, I have announced the loopbacks on ospf and
I
>> can see all of them on each router.
>>
>> Daniel Barney Briseqo
>> "El zltimo minuto tambiin tiene 60 segundos"
>> daniel.barney.b_at_hotmail.com
>>
>>
>> Blogs and organic groups at http://www.ccie.net
>>
>> _______________________________________________________________________
>> Subscription information may be found at:
>> http://www.groupstudy.com/list/CCIELab.html

Blogs and organic groups at http://www.ccie.net
Received on Thu Mar 07 2013 - 16:11:12 ART