Re: L2VPN/pseudowire inter-AS option C

Guys, I troubleshot this for a bit but was never able to make it work. I
even started from scratch and rebuilt everything but to no avail. After
re-reading Brian's post I realized that the targeted LDP session actually
wasn't up, so I reconfigured it (see below). However in the end the CE's
still weren't able to talk. I've since moved on to the INE SP version of
this lab (but with L3VPN) to see if I can get that one working (: If anyone
has any thoughts or suggestions on this one please let me know

RP/0/0/CPU0:R7#sh mpls ldp ne 2.2.2.2
Wed Mar 6 23:02:55.127 UTC

Peer LDP Identifier: 2.2.2.2:0
  TCP connection: 2.2.2.2:646 - 7.7.7.7:61995
  Graceful Restart: No
  Session Holdtime: 180 sec
  State: Oper; Msgs sent/rcvd: 48/49; Downstream-Unsolicited
  Up time: 00:36:02
  LDP Discovery Sources:
    Targeted Hello (7.7.7.7 -> 2.2.2.2, active)
  Addresses bound to this peer:
    2.2.2.2 10.0.23.2 10.0.24.2

On Wednesday, March 6, 2013, Steve Di Bias wrote:

>
> On Wed, Mar 6, 2013 at 2:14 PM, Bajoalex <bajoalex_at_gmail.com> wrote:
>
>> Just want to see "sh run l2vpn" and "sh MPLs Ldp discovery " outputs
>> from both routers.
>>
>> Sent from my iPhone
>>
>
> P1AS1:
>
> RP/0/0/CPU0:P1AS1#sh run l2vpn
> Wed Mar 6 22:12:42.703 UTC
> l2vpn
> xconnect group C1
> p2p P1
> interface GigabitEthernet0/0/0/0
> neighbor ipv4 7.7.7.7 pw-id 1
> mpls static label local 400 remote 50
> !
> !
> !
> !
> RP/0/0/CPU0:P1AS1#show mpls ldp dis
> Wed Mar 6 22:13:46.739 UTC
>
> Local LDP Identifier: 2.2.2.2:0
> Discovery Sources:
> Interfaces:
> GigabitEthernet0/0/0/1 : xmit/recv
> LDP Id: 3.3.3.3:0, Transport address: 3.3.3.3
> Hold time: 15 sec (local:15 sec, peer:15 sec)
>
> P1AS2:
>
> RP/0/0/CPU0:P1AS2#sh run l2vpn
> Wed Mar 6 22:13:08.712 UTC
> l2vpn
> xconnect group C1
> p2p P1
> interface GigabitEthernet0/0/0/0
> neighbor ipv4 2.2.2.2 pw-id 1
> mpls static label local 50 remote 400
> !
> !
> !
> !
> RP/0/0/CPU0:P1AS2#sh mpls ldp dis
> Wed Mar 6 22:14:27.376 UTC
>
> Local LDP Identifier: 7.7.7.7:0
> Discovery Sources:
> Interfaces:
> GigabitEthernet0/0/0/1 : xmit/recv
> LDP Id: 6.6.6.6:0, Transport address: 6.6.6.6
> Hold time: 15 sec (local:15 sec, peer:15 sec)
>
> Thanks,
> Steve Di Bias- CCIE #32840
>
>
> On Wed, Mar 6, 2013 at 2:14 PM, Bajoalex <bajoalex_at_gmail.com> wrote:
>
> Just want to see "sh run l2vpn" and "sh MPLs Ldp discovery " outputs
> from both routers.
>
> Sent from my iPhone
>
> On Mar 6, 2013, at 3:56 PM, Steve Di Bias <sdibias_at_gmail.com> wrote:
>
> > Hi Brian,
> >
> > The /32's are there and the targeted LDP session is up. I just can't
> > communicate between CE's for some reason. Here are the outputs:
> >
> > P2AS1:
> >
> > RP/0/0/CPU0:P2AS1#sh run router static
> > Wed Mar 6 21:34:04.642 UTC
> > router static
> > address-family ipv4 unicast
> > 10.0.36.6/32 GigabitEthernet0/0/0/0
> > !
> > !
> > RP/0/0/CPU0:P2AS1#sh run router bgp
> > router bgp 1
> > bgp router-id 3.3.3.3
> > address-family ipv4 unicast
> > network 2.2.2.2/32
> > allocate-label all
> > !
> > neighbor 10.0.36.6
> > remote-as 2
> > address-family ipv4 unicast
> > !
> > address-family ipv4 labeled-unicast
> > route-policy PASS in
> > route-policy PASS out
> > !
> > !
> > !
> >
> > P2AS2:
> >
> > RP/0/0/CPU0:P2AS2#sh run router static
> > Wed Mar 6 21:40:07.337 UTC
> > router static
> > address-family ipv4 unicast
> > 10.0.36.3/32 GigabitEthernet0/0/0/0
> > !
> > !
> >
> > RP/0/0/CPU0:P2AS2#sh run router bgp
> > Wed Mar 6 21:40:13.317 UTC
> > router bgp 2
> > bgp router-id 6.6.6.6
> > address-family ipv4 unicast
> > network 7.7.7.7/32
> > allocate-label all
> > !
> > neighbor 10.0.36.3
> > remote-as 1
> > address-family ipv4 unicast
> > !
> > address-family ipv4 labeled-unicast
> > route-policy PASS in
> > route-policy PASS out
> > !
> > !
> > !
> >
> > On P1AS1
> >
> > RP/0/0/CPU0:P1AS1#sh l2vpn xc
> > Wed Mar 6 21:41:22.822 UTC
> > Legend: ST = State, UP = Up, DN = Down, AD = Admin Down, UR = Unresolved,
> > SB = Standby, SR = Standby Ready, (PP) = Partially Programmed
> >
> > XConnect Segment 1 Segment 2
> > Group Name ST Description ST Description
> > ST
> > ------------------------ -----------------------------
> > -----------------------------
> > C1 P1 UP Gi0/0/0/0 UP 7.7.7.7
> > 1 UP
> >
> ----------------------------------------------------------------------------------------
> > RP/0/0/CPU0:P1AS1#
> > RP/0/0/CPU0:P1AS1#sh l2vpn xc de
> > Wed Mar 6 21:41:26.892 UTC
> >
> > Group C1, XC P1, state is up; Interworking none
> > AC: GigabitEthernet0/0/0/0, state is up
> > Type Ethernet
> > MTU 1500; XC ID 0x1; interworking none
> > Statistics:
> > packets: received 0, sent 0
> > bytes: received 0, sent 0
> > PW: neighbor 7.7.7.7, PW ID 1, state is up
> > PW class not set, XC ID 0xff000001
> > Encapsulation MPLS, protocol none
> > Source address 2.2.2.2
> > PW type Ethernet, control word disabled, interworking none
> > PW backup disable delay 0 sec
> > Sequencing not set
> >
> > MPLS Local Remote
> > ------------ ------------------------------
> > -----------------------------
> > Label 400 50
> > Interface GigabitEthernet0/0/0/0
> > MTU 1500
> > Control word disabled
> > PW type Ethernet
> > VCCV CV type 0x2
> > (LSP ping verification)
> > VCCV CC type 0x6
> > (router alert label)
> > (TTL expiry)
> > ------------ ------------------------------
> > -----------------------------
> > MIB cpwVcIndex: 4278190081
> > Create time: 06/03/2013 21:28:20 (00:13:06 ago)
> > Last time status changed: 06/03/2013 21:28:20 (00:13:06 ago)
> > Statistics:
> > packets: received 0, sent 0
> > bytes: received 0, sent 0
> >
> >
> > Here is a trace from P1AS1 (2.2.2.2) to P1AS2 (7.7.7.7)
> >
> > RP/0/0/CPU0:P1AS1#

Blogs and organic groups at http://www.ccie.net
Received on Thu Mar 07 2013 - 11:39:41 ART