RE: Configure Overly on CUCM

I know what an overlay is. This feature is not yet available in CUCM. If your
sole purpose is to let people call either 1000 or 2000 and it should ring the
same button on a phone, you can use any of the following: 1) Create a dummy DN
say 2000, set Call forward all to 1000. Assign 1000 to the Phone.2) Create a
Translation Pattern for 2000 and xlate the called no to 1000.
> From: go_soon2010_at_hotmail.com
> To: monavy_at_gmail.com; kapilatrish_at_hotmail.com
> CC: ccielab_at_groupstudy.com
> Subject: RE: Configure Overly on CUCM
> Date: Wed, 6 Mar 2013 12:52:34 +0300
>
> The Idea is that I'd like to assign two DNs (1000,2000) on the same button
so that the others can call any of 1000 or 2000 .The same concept of the
Overlay on CME as below ephone-dn 1
> number 1000
> !ephone-dn 2 dual-line
> number 2000
>
> ephone 1 button 1o1,2
>
> > Date: Wed, 6 Mar 2013 11:48:47 +0400
> > Subject: Re: Configure Overly on CUCM
> > From: monavy_at_gmail.com
> > To: kapilatrish_at_hotmail.com
> > CC: go_soon2010_at_hotmail.com; ccielab_at_groupstudy.com
> >
> > use forwarding.
> >
> >
> > On Wed, Mar 6, 2013 at 4:57 AM, Kapil Atrish
<kapilatrish_at_hotmail.com>wrote:
> >
> > > No, that's not possible in CUCM. > From: go_soon2010_at_hotmail.com
> > > > To: ccielab_at_groupstudy.com
> > > > Subject: Configure Overly on CUCM
> > > > Date: Wed, 6 Mar 2013 02:02:09 +0300
> > > >
> > > > Can I configure 2 DNs on the same Button on IP Phone with CUCM like
the
> > > overlay in CME ?
> > > >
> > > >
> > > > Blogs and organic groups at http://www.ccie.net
> > > >
> > > >
Received on Wed Mar 06 2013 - 13:15:23 ART