Hi guys,
in my lab I've to shape to an average rate of 256k with bc and be of 12800
and 6400.
Router policy should match pvc 305.
I think there are 2 ways to do same thing here.. can you confirm the end
result is the same ? (at least looks so from my show policy-map inter
command)
sh policy-map
*option n.1*
class-map DLCI_305
match fr-dlci 305
policy-map POLICY_FR_OUT
class DLCI_305
shape average 256000 12800 6400
int se1/0
service-policy output POLICY_FR_OUT
*option n.2*
policy-map ALL
class class-default
shape average 256000 12800 6400
map-class frame-relay DLCI_305
service-policy output ALL
int se1/0
frame-relay interface-dlci 305
class DLCI_305
*VERIFICATION option 1*
Rack1R3#show policy-map inter se1/0
Serial1/0
Service-policy output: POLICY_FR_OUT
Class-map: DLCI_305 (match-all)
3 packets, 384 bytes
5 minute offered rate 0 bps, drop rate 0 bps
Match: fr-dlci 305
Traffic Shaping
Target/Average Byte Sustain Excess Interval Increment
Rate Limit bits/int bits/int (ms) (bytes)
256000/256000 2400 12800 6400 50 1600
Adapt Queue Packets Bytes Packets Bytes Shaping
Active Depth Delayed Delayed Active
- 0 3 384 0 0 no
Class-map: class-default (match-any)
1 packets, 14 bytes
5 minute offered rate 0 bps, drop rate 0 bps
Match: any
*VERIFICATION option 2*
Rack1R3#show policy-map inter se1/0
Serial1/0: DLCI 305 -
Service-policy output: ALL
Class-map: class-default (match-any)
1 packets, 84 bytes
5 minute offered rate 0 bps, drop rate 0 bps
Match: any
Traffic Shaping
Target/Average Byte Sustain Excess Interval Increment
Rate Limit bits/int bits/int (ms) (bytes)
256000/256000 2400 12800 6400 50 1600
Adapt Queue Packets Bytes Packets Bytes Shaping
Active Depth Delayed Delayed Active
- 0 1 84 0 0 no
thanks in advance!
-- @ccie99999 https://twitter.com/ccie99999 Blogs and organic groups at http://www.ccie.netReceived on Wed Mar 06 2013 - 04:57:43 ART
This archive was generated by hypermail 2.2.0 : Wed Apr 03 2013 - 19:06:18 ART