Re: RR & metrics not being propergated to ebgp peer from RR

From: Brian Dennis <bdennis_at_ine.com>
Date: Thu, 28 Feb 2013 14:25:21 -0600

MED is a non-transitive attribute which means in your case if the CE
learns a path via iBGP you can't pass the MED for that path to an eBGP
peer. If the CE originated the path into BGP itself then it would be
passed to its eBGP peer (PE).

-- 
Brian Dennis, CCIEx5 #2210 (R&S/ISP-Dial/Security/SP/Voice)
bdennis_at_ine.com
INE, Inc.
http://www.INE.com
On 2/28/13 3:05 PM, "Tony Singh" <mothafungla_at_gmail.com> wrote:
>Hi Experts
>
>I may be missing some fundamental here but say the following
>
>SW>CE>PE
>
>SW is RR but also announcing several subnets into bgp process which
>reference preferred metrics
>
>these metric are advertised out to CE, CE see's these and advertises these
>metrics out to PE but PE does not see these metrics in bgp rib....?
>
>anything im doing wrong....
>
>
>
>CE#$ ipv4 unicast neighbors x.x.x.x advertised-routes
>BGP table version is 20, local router ID is x.x.x.x
>Status codes: s suppressed, d damped, h history, * valid, > best, i -
>internal,
>              r RIB-failure, S Stale
>Origin codes: i - IGP, e - EGP, ? - incomplete
>
>   Network          Next Hop            Metric LocPrf Weight Path
>*>ix.x.x.x  x.x.x.x         200    100      0 i
>*>ix.x.x.x x.x.x.x        200    100      0 i
>*>ix.x.x.x
>                    x.x.x.x         200    100      0 i
>*>ix.x.x.x  x.x.x.x         100    200      0 i
>*>ix.x.x.x
>                    x.x.x.x        100    200      0 i
>*> x.x.x.x
>                    0.0.0.0                100    200  32768 i
>*> x.x.x.x
>                    0.0.0.0                100    200  32768 i
>*> x.x.x.x
>                    0.0.0.0                100    200  32768 i
>*>ix.x.x.x
>                    x.x.x.x        100    200      0 i
>
>Total number of prefixes 9
>
>
>
>PE#show ip bgp
>BGP table version is 28, local router ID is  x.x.x.x
>Status codes: s suppressed, d damped, h history, * valid, > best, i -
>internal,
>              r RIB-failure, S Stale
>Origin codes: i - IGP, e - EGP, ? - incomplete
>
>   Network          Next Hop            Metric LocPrf Weight Path
>*   x.x.x.x    x.x.x.x                           0 xxxxx i
>*>                   x.x.x.x                         0 xxxxx i
>*   x.x.x.x   x.x.x.x                         0 xxxxx i
>*>                   x.x.x.x                          0 xxxxx i
>*   x.x.x.x
>                     x.x.x.x                          0 xxxxx i
>*>                   x.x.x.x                           0 xxxxx i
>*   x.x.x.x     x.x.x.x                          0 xxxxx i
>*>                  x.x.x.x                           0 xxxxx i
>*   x.x.x.x
>                    x.x.x.x         100             0 xxxxx i
>*                    x.x.x.x                          0 xxxxx i
>*>                  0.0.0.0                  0         xxxxx i
>*   x.x.x.x
>                     x.x.x.x                           0 xxxxx i
>*                    x.x.x.x         100             0 xxxxx i
>*>                  0.0.0.0                  0         xxxxx i
>
>
>Blogs and organic groups at http://www.ccie.net
>
>_______________________________________________________________________
>Subscription information may be found at:
>http://www.groupstudy.com/list/CCIELab.html
Blogs and organic groups at http://www.ccie.net
Received on Thu Feb 28 2013 - 14:25:21 ART

This archive was generated by hypermail 2.2.0 : Fri Mar 01 2013 - 07:57:59 ART