Ramesh
As far as I remember the ports are dynamic in nature, that means the port ll try to become the trunk first and if it fails, it will switch back to the access mode.
HTH,
Mohammad Mousa
CCIE #36990
On Feb 25, 2013, at 5:59 PM, "ramesh Kumar" <rameshkumar123321_at_yahoo.com> wrote:
Hello,
I see the below config under one of the switching interfaces. Access
vlan and trunk vlan configured under one single physical interface. How would
this switchport behave? access vlan should not be tagged and trunked vlans
should be tagged. Trying to understand if this is a correct config. please
help me verify.
switchport
switchport access vlan 454
switchport trunk
allowed vlan 44,454
switchport mode trunk
Thanks,
Ramesh. K
Blogs and organic groups at http://www.ccie.net
Received on Mon Feb 25 2013 - 18:09:19 ART
This archive was generated by hypermail 2.2.0 : Fri Mar 01 2013 - 07:57:58 ART