Re: using ip unnumbmberred on fast ethernet interface

Rack1R3#conf t
Enter configuration commands, one per line. End with CNTL/Z.
Rack1R3(config)#int fa0/0
Rack1R3(config-if)#ip unnumbered lo0
Point-to-point (non-multi-access) interfaces only
Rack1R3(config-if)#int fa0/0.10
Rack1R3(config-subif)#en do 10
Rack1R3(config-subif)#ip unnumbered lo0
Rack1R3(config-subif)#
Rack1R3(config-subif)#

-- 
Brian Dennis, CCIEx5 #2210 (R&S/ISP-Dial/Security/SP/Voice)
bdennis_at_ine.com
INE, Inc.
http://www.INE.com
On 2/25/13 1:46 PM, "amin" <amin_at_axizo.com> wrote:
>Hello dear,
>
>How I can use  IP unnumbered on fast Ethernet interface?
>
> 
>
>Regards,
>
>Amin
>
>
>Blogs and organic groups at http://www.ccie.net
>
>_______________________________________________________________________
>Subscription information may be found at:
>http://www.groupstudy.com/list/CCIELab.html
Blogs and organic groups at http://www.ccie.net