Re: ospf domain-id

It can be different. In that case, LSAs that are generated will be
Type 5. If domain-id matches, generated LSA will be of Type 3.

--
Marko Milivojevic - CCIE #18427 (SP R&S)
Senior CCIE Instructor - IPexpert
On Fri, Jan 11, 2013 at 9:08 AM, Tauseef Khan <tasneemjan_at_googlemail.com> wrote:
> Do i need to match domain id on all the PE routers connecting customer
> sites for mbgp routes to correctly redistributed into ospf. OR domain-id
> could be different on PEs as below.
>
>
> Router_A
> ip ospf 10 vrf CUSTOMER_A
> domain-id 1.1.1.1
> !
> ip vrf CUSTOMER_A
>  rd 10:10
>  route-target both 10:10
>
>
> RouterB
> ip ospf 10 vrf CUSTOMER_A
> domain-id 2.2.2.2
> !
> p vrf CUSTOMER_A
>  rd 20:20
>  route-target both 10:10
>
> regards
>
>
> Blogs and organic groups at http://www.ccie.net
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
Blogs and organic groups at http://www.ccie.net