MPLS TE tunnels from PE to P and PE.

Im trying to simulate and run MPLS TE tunnels from PE to P and P and PE so
that I dont use mpls

R1(CE)----R2(PE)(2.2.2.2)(tunn19)-----------(Tunn23)R3------R4--------R5---------R6(tunn619)-----XR1(19.19.19.19)(tunn19)------XR2(CE)

Instead of running a tunnel and running targetted LDP over the TEs , Im
trying to run tunnels

from R2---R6 and from R6---XR1

and vice-versa Tunnels from XR1 --- R3 and from R3 --- R2 so that I have a
 complete RSVP LSP

In the config

I have a static route from R2 going into the Tunnel

R2(config)#ip route 19.19.19.19 255.255.255.255 tun19

R6(config)#ip route 19.19.19.19 255.255.255.255 tun619

 and

From the other end

XR1 to R2

XR1(config)#ip route 2.2.2.2 255.255.255.255 tun19

R2(config)#p route 2.2.2.2 255.255.255.255 tun23

If someone has tried it please advise if Im missing something

Blogs and organic groups at http://www.ccie.net
Received on Wed Jan 09 2013 - 13:50:52 ART