RE: Native VLAN - CATOS

Hiessaid_at_gmail.com is correct!I understand you have a trunk between a 2960 and
a 6500 with a Native VLAN other than 1.Example below:
IOSWS-C6509(config-if)#switchport ot
WS-C6509(config-if)#switchport trunk encapsulation dot1q
WS-C6509(config-if)#switchport mode trunk
WS-C6509(config-if)#switchport trunk native vlan 150

CatOS:

WS-C6509> (enable) set trunk 2/20 on dot1q
WS-C6509> (enable) set vlan 150 2/20

Please remember to create Vlan 150 before setting it as the native Vlan of
the trunk.
Please let us know if this worked.
Regards,Jojo

> From: lessaid_at_gmail.com
> Date: Fri, 4 Jan 2013 15:27:07 +0100
> Subject: Re: Native VLAN - CATOS
> To: vishal.rane_at_hotmail.co.in
> CC: ccielab_at_groupstudy.com
>
> Vishal
>
> juste use the command :
>
> *set vlan 150 5/1*
>
> where 5/1 is the port connected to the 2960s and should be configured on
> trunk state.
>
>
> Lessaid, Since '80
>
>
>
> On Fri, Jan 4, 2013 at 1:31 PM, Vishal Rane
<vishal.rane_at_hotmail.co.in>wrote:
>
> > Hi
> >
> > Can someone guide how to configure Native Vlan on CATOS and should be
> > applicable only between 6500----to---2960S
> >
> >
> > 6500---------------------------2960S
> > Default native vlan 1 need to change to 150
> >
> >
> > 6500--------------------------3560
> > Default native vlan 1
> >
> >
> > On 2960 the config
> > int giga 1/0/50
> > switchport trunk native vlan 150
> > switchport mode trunk
> >
> >
> > thanks
> > Vishal
> >
> >
> > Blogs and organic groups at http://www.ccie.net
> >
> > _______________________________________________________________________
> > Subscription information may be found at:
> > http://www.groupstudy.com/list/CCIELab.html
>
>
> Blogs and organic groups at http://www.ccie.net
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html

Blogs and organic groups at http://www.ccie.net
Received on Mon Jan 07 2013 - 02:05:40 ART