Re: Unified CUCM 8.0 7816-I4 Appliance

Hi Ryan,

What I meant is by checking DLU count usage, it does not give the User
License usage. Because Irfan's question was how to check the User License
Usage. Because he was confused with CUWL and DLUs. That is why I explained
how to derive the CUWL usage from CUCM.
Finally CUCM 9.0 onwards this licensing confusion is not there. Cisco
introduced new ELM Server and now the CUCM directly work with User Licenses
and not anymore DLUs

On Tue, Dec 25, 2012 at 8:57 PM, Ryan West <rwest_at_zyedge.com> wrote:

> Always best to consult the SRND for a final decision -> ****
>
>
> http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/srnd/8x/sizing.html#wp1147527
> ****
>
> ** **
>
> -ryan****
>
> ** **
>
> *From:* Sandaka Ranatunga [mailto:sandakaranatunga_at_gmail.com]
> *Sent:* Tuesday, December 25, 2012 11:42 AM
> *To:* Ryan West
> *Cc:* Irfan Sid; Cisco certification; Cisco certification
> *Subject:* Re: Unified CUCM 8.0 7816-I4 Appliance****
>
> ** **
>
> Hi Irfan,
>
> MCS 7816 server can handle only up to 500 Users or up to 600 Phones
> only.(2500 can be handled only by MCS 7835 Server)
>
>
> You can install even 5000 Lics in MCS 7816 Server. Because License is
> nothing to do with Hardware Platform. But When more than 500 Phones
> register with the MCS 7816 Server you may experience operational issues
> such as low response, Phones unregister time to time etc.
>
> 2400 is DLU count and this will not be the User license count. From CUCM
> you can not directly check how many user lics are utilized. What you can do
> is check the number of phones configured and No of users configured with
> the phones. Based on this you can decide the license utilization.
>
> Hope this will clear your doubts
>
> ThanX
>
> Regards,
> Sandaka Ranatunga
> CCIE#32555
>
> -****
>

-- 
Sandaka Ranatunga
(CCNA, CCDA, CCNP, CCIE-Written, JNCIA-M/E, JNCIA-ER)
Department of Computer Science and Engineering,
University of Moratuwa.
Sri Lanka.
Blogs and organic groups at http://www.ccie.net