RE: GNS Nat Issue

The config seems good. Test again and capture the "debug ip nat detailed"
output.

Regards,

Antonio Soares, CCIE #18473 (R&S/SP)
amsoares_at_netcabo.pt
http://www.ccie18473.net

-----Original Message-----
From: nobody_at_groupstudy.com [mailto:nobody_at_groupstudy.com] On Behalf Of
Kaiser Anwar
Sent: sabado, 15 de Dezembro de 2012 16:44
To: ccielab_at_groupstudy.com
Subject: GNS Nat Issue

Hi, my router that connects to the MS loopback can ping the loopback and
command DNS router on the internet. But I cannot get the NAT to work. Can
someone see why that is? I have attached the relevant config in the text
file

R11#sh run

Building configuration...

!

!

interface FastEthernet1/0

ip address 192.168.137.2 255.255.255.0

ip nat outside

ip virtual-reassembly

duplex auto

speed auto

!

interface FastEthernet1/1

ip address 165.4.34.11 255.255.255.0

ip nat inside

ip virtual-reassembly

duplex auto

speed auto

!

ip route 0.0.0.0 0.0.0.0 192.168.137.1

!

no ip http server

no ip http secure-server

!

ip nat source list 1 interface FastEthernet1/0 overload

!

access-list 1 permit 165.4.34.0 0.0.0.255

!

!

!

!

control-plane

!

!

!

!

!

Blogs and organic groups at http://www.ccie.net
Received on Mon Dec 17 2012 - 13:48:31 ART