Re: OSPF on 32 bit dialer interface

Adam, I tried with point-to-point as well. cco article mentions to set it
to point-to-mluti

http://www.cisco.com/en/US/tech/tk365/technologies_tech_note09186a0080093f0f.shtml

On 28 November 2012 11:33, Adam Booth <adam.booth_at_gmail.com> wrote:

> Hi Tauseef,
>
> You don't need to set the OSPF interface type on the physical interfaces
> since IP isn't running on them - just the virtual-template and dialer but I
> would have expected you need to set the ospf interface type to be
> point-to-point not point-to-multipoint
>
> Cheers,
> Adam
>
>
>
> On Wed, Nov 28, 2012 at 9:10 PM, Tauseef Khan <tasneemjan_at_googlemail.com>wrote:
>
>> OSPF config as below:
>>
>>
>> R2: (R2 has negioted the ip address from Server)
>> router ospf 1
>> router-id 2.2.2.2
>> log-adjacency-changes
>> network 2.2.2.2 0.0.0.0 area 2
>> network 172.31.255.254 0.0.0.0 area 2
>>
>> R1:
>> router ospf 1
>> router-id 1.1.1.1
>> network 1.1.1.1 0.0.0.0 area 2
>> network 172.31.255.1 0.0.0.0 area 2
>>
>>
>>
>> On 28 November 2012 11:03, Tauseef Khan <tasneemjan_at_googlemail.com>
>> wrote:
>>
>> > Please find below the configs
>> > server:R1
>> >
>> > bba-group pppoe CISCO
>> > virtual-template 16
>> > !
>> > interface Gigabit0/0
>> > no ip address
>> > ip ospf network point-to-multipoint
>> > ip ospf mtu-ignore
>> > duplex auto
>> > speed auto
>> > pppoe enable group CISCO
>> > end
>> >
>> > !
>> > interface Virtual-Template16
>> > mtu 1492
>> > ip address 172.31.255.1 255.255.255.0
>> > ip ospf network point-to-multipoint
>> > ip ospf mtu-ignore
>> > peer default ip address pool 1.6
>> > ppp authentication chap
>> > end
>> >
>> > usename R2 password pass
>> >
>> > ip local-pool 6.6 172.31.255.254
>> >
>> > __________________________________________________
>> >
>> > Client R2:
>> > interface FastEthernet0/0
>> > no ip address
>> > ip ospf network point-to-multipoint
>> > ip ospf mtu-ignore
>> > speed auto
>> > half-duplex
>> > pppoe enable
>> > pppoe-client dial-pool-number 16
>> > !
>> >
>> > interface Dialer16
>> > mtu 1492
>> > ip address negotiated
>> > encapsulation ppp
>> > ip ospf network point-to-multipoint
>> > dialer pool 16
>> > dialer idle-timeout 0
>> > dialer persistent
>> > no peer neighbor-route
>> > ppp chap password 0 pass
>> > end
>> >
>> > R2:
>> > sh ip ospf int br
>> > Interface PID Area IP Address/Mask Cost State Nbrs
>> F/C
>> >
>> __________________________________________________________________________
>> > Di16 1 2 172.31.255.254/32 1785 P2MP
>> 0/0
>> >
>> __________________________________________________________________________
>> >
>> > Kind regards
>> >
>> > Tauseef
>> > mobile: +44 7837209187
>> >
>> >
>> >
>> > On 28 November 2012 10:10, Mohammad Mousa <mohd-mousa_at_hotmail.com>
>> wrote:
>> >
>> >> Post your full configs so we can check together. Did you change the
>> MTU?
>> >>
>> >> --
>> >> Mohammad Mousa
>> >> CCIE #36990
>> >>
>> >>
>> >>
>> >>
>> >>
>> >>
>> >> On Nov 28, 2012, at 12:28 PM, Tauseef Khan wrote:
>> >>
>> >> > Appreciate if some one could help. I have ospf running on 2 routers
>> R1
>> >> and
>> >> > R2.
>> >> > R2 is a PPPoE client and R1 is the server. R2 has a negotiated ip
>> >> address
>> >> > on the dialer interface from R1 which is host (/32) address while R1
>> >> has a
>> >> > /29 bit Ip address on its interface facing towards Client.
>> >> > OSPF adj is not coming up between the client and Server
>> >> > On client dialer int and Server int I have ip ospf network
>> >> > point-to-multipoint
>> >> > i also tried no peer neighbor-route on client dialer interface.
>> >> >
>> >> > debugs on the client side show:
>> >> > OSPF: Rcv pkt from 172.31.29.1, Dialer16, area 0.0.0.3 : src not on
>> the
>> >> > same network
>> >> >
>> >> > I have tried changing the network type to poin-to-poitn as well but
>> no
>> >> adj
>> >> >
>> >> > Regards
>> >> >
>> >> >
>> >> > Blogs and organic groups at http://www.ccie.net
>> >> >
>> >> >
>> _______________________________________________________________________
>> >> > Subscription information may be found at:
>> >> > http://www.groupstudy.com/list/CCIELab.html
>>
>>
>> Blogs and organic groups at http://www.ccie.net
>>
>> _______________________________________________________________________
>> Subscription information may be found at:
>> http://www.groupstudy.com/list/CCIELab.html

Blogs and organic groups at http://www.ccie.net
Received on Wed Nov 28 2012 - 11:48:09 ART