Re: OSPF on 32 bit dialer interface

Post your full configs so we can check together. Did you change the MTU?

--
Mohammad Mousa 
CCIE #36990
On Nov 28, 2012, at 12:28 PM, Tauseef Khan wrote:
> Appreciate if some one could help. I have  ospf running on 2 routers R1 and
> R2.
> R2 is a PPPoE client and R1 is the server.  R2 has a negotiated ip address
> on the dialer interface from R1 which is host (/32) address while R1 has a
> /29 bit Ip address on its interface facing towards Client.
> OSPF adj is not coming up between the client and Server
> On client dialer int and Server int I have ip ospf network
> point-to-multipoint
> i also tried no peer neighbor-route on client dialer interface.
> 
> debugs on the client side show:
> OSPF: Rcv pkt from 172.31.29.1, Dialer16, area 0.0.0.3 : src not on the
> same network
> 
> I have tried changing the network type to poin-to-poitn as well but no adj
> 
> Regards
> 
> 
> Blogs and organic groups at http://www.ccie.net
> 
> _______________________________________________________________________
> Subscription information may be found at: 
> http://www.groupstudy.com/list/CCIELab.html
Blogs and organic groups at http://www.ccie.net