Your config looks good. I would try removing and re-applying your config. I
have run into an issue before with ASA and netflow and this seemed to
resolve it for me.
On Wed, Nov 21, 2012 at 3:04 PM, 6PE_2.0 <spycharlies_at_gmail.com> wrote:
> Hello Gurus,
>
> I was wondering if anyone has implement Cisco ASA netflow v9 with
> Solarwinds Orion NTA v3.10
>
> I have the standard ASA configs configured on my device
>
> flow-export destination inside 192.1.1.1 2055
> flow-export template timeout-rate 1
> flow-export delay flow-create 60
>
> logging flow-export-syslogs disable
>
> access-list netflow-export extended permit ip any any
>
> class-map netflow-export-class
> match access-list netflow-export
>
> policy-map global_policy
> class netflow-export-class
> flow-export event-type all destination 192.1.1.1
> service-policy global_policy global
>
>
> Looking at CFLOW in Wireshark, I can see CFLOW (v9) from the ASA to the
> Solarwind, but looking at FlowSet 1 (13), no data and packet is being
> received by the NTA.
>
> " #sh flow counters" on the ASA shows I have sent over 24384364 packets
>
> Solarwinds Tech support says it s my ASA, but I can t see anything wrong
> with my ASA configs
>
> Any ideas
>
> Thanks in advance
>
> Software Version 8.2(1), Device Manager Version 6.2(1)
>
>
> Blogs and organic groups at http://www.ccie.net
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
>
>
>
>
>
>
>
>
-- Marc Abel CCIE #35470 (Routing and Switching) Blogs and organic groups at http://www.ccie.netReceived on Wed Nov 21 2012 - 16:02:27 ART
This archive was generated by hypermail 2.2.0 : Sat Dec 01 2012 - 07:27:50 ART