Re: Router on a stick

Dear Experts,

Can anyone look into my config and help me where I am
mistaking.

Dynamips/Dynagen Ubuntu server .net file

[[Router R6]]
  model =
3725
  console = 2006
  autostart = False
  #slot1 = NM-4T
  F0/0 =
NIO_linux_eth:eth1.109
  F0/1 = NIO_linux_eth:eth1.110
  S0/0 = FRSW 6
Dynamips/Dynagen Ubuntu server ifconfig output

eth1.109 Link encap:Ethernet
 HWaddr 00:15:17:c8:32:1a
          inet6 addr: fe80::215:17ff:fec8:321a/64
Scope:Link
          UP BROADCAST RUNNING MULTICAST MTU:1536 Metric:1
     
    RX packets:122620 errors:0 dropped:100 overruns:0 frame:0
          TX
packets:52053 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0
txqueuelen:0
          RX bytes:6635309 (6.6 MB) TX bytes:4340170 (4.3 MB)
===================================================================

Breakout
Switch
System image file is "flash:/c3550-ipservicesk9-mz.122-40.SE.bin"
!
interface FastEthernet0/9
 description R6-Fa0/0 connected at SW2-Fa0/6
 switchport access vlan 109
 switchport mode dot1q-tunnel
 l2protocol-tunnel
cdp
 no cdp enable
!
!
interface FastEthernet0/48
 description Connected with
Dynamips Server
 switchport trunk encapsulation dot1q
 switchport mode trunk
 switchport nonegotiate
end
=============================================================================
SW2 Fa0/6 configuration

Rack5SW2#sh runn int fa0/6
Building configuration...
Current configuration : 94 bytes
!
interface FastEthernet0/6
 switchport trunk
encapsulation dot1q
 switchport mode trunk
end

Rack5SW2#
=======================================================================

R6
Configuration

!
interface FastEthernet0/0
 no ip address
 speed 100
 full-duplex
!
interface FastEthernet0/0.67
 encapsulation dot1Q 67
 ip
address 155.5.67.6 255.255.255.0
!
interface FastEthernet0/0.146
 encapsulation dot1Q 146
 ip address 155.5.146.6 255.255.255.0
!
Thanks,
Nadeem Anjum

________________________________
 From:M Adnan
<taurusadnan19_at_gmail.com>
To:M Nadeem Anjum <nadeemkool_at_yahoo.com>
Sent:Thursday, November 8, 2012 2:43 PM
Subject:Re: Router on a stick
 

yes
you can do that

On Thu, Nov 8, 2012 at 2:40 PM, M Nadeem Anjum
<nadeemkool_at_yahoo.com> wrote:

Dear Experts,
>
>Can I perform "Router on a
Stick" scenario using Dynamips/Dynagen Q-in-Q configuration using 4 real
switches and 1 breakout switch.
>
>All switches are c3550.
>
>Thanks,
>Nadeem
Anjum
>
>
>Blogs and organic groups at http://www.ccie.net
>
>_______________________________________________________________________
>Subscription information may be found at:
>http://www.groupstudy.com/list/CCIELab.html

Blogs and organic groups at http://www.ccie.net
Received on Thu Nov 08 2012 - 02:17:07 ART