Re: hsrp, and trunk ports.

It's vlan specific, so are you saying in this vlan you need to also allow for
hsrp?

--
BR
Sent from my iPhone on 3
On 15 Oct 2012, at 19:08, jeff roscigna <cciedata2013_at_gmail.com> wrote:
> if you filter this with vacls, you filter all hsrp packets,including the
packet needed because  you cannot say "dont send hsrp packets only across this
interface ".
>
> Saludos
>
> Horacio Farias
>
> On Oct 15, 2012, at 12:42 PM, Tony Singh <mothafungla_at_gmail.com> wrote:
>
>>
>> could not find an ethertype for this is anyone knows..?
>>
>> in the example I sent Jeff your creating a mac access list & ip access-list
for the proprietary hsrp mac address & hsrp multicast/udp port this would be
applicable for both inbound & outbound traffic depending on the vlan(s) you
apply it too AFAIK
>>
>> needs testing
>>
>>
>> On 15 October 2012 16:27, Jay McMickle <jay.mcmickle_at_yahoo.com> wrote:
>> If using L3, could you use a VACL and filter the ethertype?
>>
>> Regards,
>> Jay McMickle- CCIE #35355 (RS), 3x CCNP (RS,Security,Design)
>> Sent from my iPhone
>>
>> On Oct 15, 2012, at 8:10 AM, jeff roscigna <cciedata2013_at_gmail.com> wrote:
>>
>> > hi people,
>> >
>> > anyone knows if is there any posibility to filter hsrp packets out trunk
ports that connects to customers?
>> >
>> > im using nexus 7k with vpcs going to ucs fabric and i need to filter hsrp
packets out to ufc fabric.
>> >
>> > with best regards.
>> >
>> >
>> > Blogs and organic groups at http://www.ccie.net
>> >
>> > _______________________________________________________________________
>> > Subscription information may be found at:
>> > http://www.groupstudy.com/list/CCIELab.html
>>
>>
>> Blogs and organic groups at http://www.ccie.net
>>
>> _______________________________________________________________________
>> Subscription information may be found at:
>> http://www.groupstudy.com/list/CCIELab.html
Blogs and organic groups at http://www.ccie.net