RE: "cannot complete conference" error message on CUCME 8.8

I forgot,

when executing, Debug ephone detail mac-address A.B.C.D ---- This mac address
should be the
mac-address of the ephone that originates the conference.

See if you are running g.722 as codec. if you do change back to G711 and try
again.

Regards,

> From: barrerj1_at_hotmail.com
> To: go_soon2010_at_hotmail.com; ccielab_at_groupstudy.com
> Subject: RE: "cannot complete conference" error message on CUCME 8.8
> Date: Thu, 4 Oct 2012 23:48:49 -0500
>
> Could you do "no create-cnf files" then "create cnf-files" under Telephony
> service
> If that does not work please provide the following outputs
>
> Update your config as follows
> 1.
> service timestamps debug datetime msec
> service timestamps log datetime msec
> !
> logging buffered 5000000
> logging rate-limit 10000
> logging queue-limit 100000
> no logging console
>
> !
> !
> 2.Provide
> Sh ver
> Sh run
>
> #3. Then enable debugs
>
> debug ephone detail
> debug sccp error
> debug voip ccapi inout
> debug dspfarm errors
> debug dspfarm events
> debug ephone detail mac-address <mac-address of the phone> (phone trying to
> create conference)
>
>
> Sh deb
> Term mon
>
> Clear log before placing call:
>
> Clear logg
>
> Then place the call and get content of the buffer as:
>
> Term len 0
>
> Show logg
>
>
> Regards,
>
> Jojo
>
>
>
> > From: go_soon2010_at_hotmail.com
> > To: barrerj1_at_hotmail.com; ccielab_at_groupstudy.com
> > Subject: RE: "cannot complete conference" error message on CUCME 8.8
> > Date: Fri, 5 Oct 2012 07:17:37 +0300
> >
> > Thanks buddy for your prompt response
> >
> > I already added the following command but it didn't work too
> >
> > ephone-dn 62 octo
> > number A000
> > conference ad-hoc
> >
> >
> >
> > > From: barrerj1_at_hotmail.com
> > > To: go_soon2010_at_hotmail.com; ccielab_at_groupstudy.com
> > > Subject: RE: "cannot complete conference" error message on CUCME 8.8
> > > Date: Thu, 4 Oct 2012 23:02:48 -0500
> > >
> > > We need your full config next time.
> > > However, please ensure you are not missing ad-hoc conference DNs
> > >
> > > Per below doc
> > >
> > >
>
http://www.cisco.com/en/US/docs/voice_ip_comm/cucme/admin/configuration/guide
> > > /cmeconf.html#wp1011236
> > >
> > > you need ad-hoc conference to do 3 party or more
> > > conferences.Create ephones dn's with another number and add conference
> > > ad-hoc
> > >
> > > Hth
> > >
> > > Jojo
> > >
> > >
> > >
> > > > From: go_soon2010_at_hotmail.com
> > > > To: ccielab_at_groupstudy.com
> > > > Subject: "cannot complete conference" error message on CUCME 8.8
> > > > Date: Fri, 5 Oct 2012 00:43:19 +0300
> > > >
> > > > Hello
> > > > I have CUCME 8.8 and I configured conference resources (DSP) but I'm
> getting
> > > the error "cannot complete conference" on my Cisco
> > > > phones. . When i remove the conference hardware command under
> > > telephony-service it works fine .
> > > > I know the problem is a configuration parameter but can get it
> > > > to work
> > > > Here's my config
> > > >
> > > > voice-card 0
> > > > no dspfarm
> > > > dsp services dspfarm
> > > >
> > > > sccp local GigabitEthernet0/0
> > > > sccp ccm 10.10.10.1 identifier 1 version 7.0
> > > > sccp
> > > > !
> > > > sccp ccm group 1
> > > > associate ccm 1 priority 1
> > > > associate profile 3 register mtp123
> > > > associate profile 2 register xcode1
> > > > associate profile 1 register confer1
> > > > !
> > > > dspfarm profile 2 transcode
> > > > codec g711ulaw
> > > > codec g711alaw
> > > > codec g729ar8
> > > > codec g729abr8
> > > > codec g729br8
> > > > codec g729r8
> > > > maximum sessions 2
> > > > associate application SCCP
> > > > !
> > > > dspfarm profile 1 conference
> > > > codec g711ulaw
> > > > codec g711alaw
> > > > codec g729ar8
> > > > codec g729abr8
> > > > codec g729r8
> > > > codec g729br8
> > > > maximum sessions 2
> > > > associate application SCCP
> > > > !
> > > > dspfarm profile 3 mtp
> > > > codec g711ulaw
> > > > maximum sessions hardware 2
> > > > maximum sessions software 10
> > > > associate application SCCP
> > > >
> > > > telephony-service
> > > > sdspfarm units 4
> > > > sdspfarm transcode sessions 12
> > > > sdspfarm tag 1 confer1
> > > > sdspfarm tag 2 xcode1
> > > > sdspfarm tag 3 mtp123
> > > > conference hardware
> > > >
> > > >
> > > > Blogs and organic groups at http://www.ccie.net
> > > >
> > > >
Received on Fri Oct 05 2012 - 00:22:30 ART