I assume you have tested the ICMP and http for IPv6 starting with the server itself and then going further out. I also assume that CheckPoint was properly configured for IPv6 and the appropriate connection attempts show up in the logs and interface tcpdumps. So, at which point of your diagram do you experience the connectivity loss?
Sent via BlackBerry from T-Mobile
-----Original Message-----
From: Joseph Dougherty <jdougherty_at_jwdougherty.com>
Sender: nobody_at_groupstudy.com
Date: Thu, 27 Sep 2012 11:58:11
To: Cisco Fanatic<ebay_products_at_hotmail.com>
Reply-To: Joseph Dougherty <jdougherty_at_jwdougherty.com>
Cc: <joe_at_affirmedsystems.com>; ccielab_at_groupstudy.com<ccielab_at_groupstudy.com>
Subject: Re: IPv6 for Websites
Have the webservers been configured with IPv6 (both for the interfaces
themselves and whatever webserver software you're using)?
On Thu, Sep 27, 2012 at 10:59 AM, Cisco Fanatic
<ebay_products_at_hotmail.com>wrote:
> Understand .. We still need to explore a solution. Our carrier has given
> us a
> IPv6 block. The network looks something like
>
> Internet
> |
> Router [Carrier, IPv6 enabled]
> |
> Switch [Our, IPv6 enabled]
> |
> Checkpoint Firewall
> |
> Switch [Our]
> |
> Servers [websites]
>
>
> Company coming from Internet trying to access say ..
>
> http://2001:550:2:27::A
>
>
>
>
> > From: joe_at_affirmedsystems.com
> > To: ebay_products_at_hotmail.com; ccielab_at_groupstudy.com
> > Subject: RE: IPv6 for Websites
> > Date: Thu, 27 Sep 2012 14:43:50 +0000
> >
> > Your carrier needs to route IPv6 for you...
> >
> > Here's a hint: IPv6 was created to boost IT companies bottom line... its
> not
> needed, never was needed, never will be needed...
> >
> > 99% of companies (or more) use nat... entire clusters of home internet
> users
> can also use nat.
> >
> > The "Global IP Shortage" is a solution looking for a problem...
> >
> > Bet you $10 in 2020 we're all still using IPv4
> >
> > :)
> >
> > -----Original Message-----
> > From: nobody_at_groupstudy.com [mailto:nobody_at_groupstudy.com] On Behalf Of
> Cisco Fanatic
> > Sent: Thursday, September 27, 2012 10:29 AM
> > To: ccielab_at_groupstudy.com
> > Subject: IPv6 for Websites
> >
> > All -
> >
> > As IPv6 will be the future of Internet and I think I know much about
> IPv6 as
> I am studying for my CCIE.
> >
> > I have a quick question and finding it very difficult to implement.
> >
> > My company is hosting 2 sites for a small company. This company
> approached
> and said that they want there sites to be IPv6 ready. We enabled IPv6
> protocol
> on the switches and Checkpoint firewall but it still does not work.
> >
> > Am I missing something or it is not that easy as I am thinking?
> >
> > Any help will be appreciated.
> >
> > Regards,
> > Yuri
> >
> >
> > Blogs and organic groups at http://www.ccie.net
> >
> > _______________________________________________________________________
> > Subscription information may be found at:
> > http://www.groupstudy.com/list/CCIELab.html
>
>
> Blogs and organic groups at http://www.ccie.net
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
Blogs and organic groups at http://www.ccie.net
Received on Thu Sep 27 2012 - 16:56:29 ART
This archive was generated by hypermail 2.2.0 : Mon Oct 01 2012 - 06:40:29 ART