Hi Guys,
I am configuring Cisco 7940 IP Phones with CME 8.0. The previous configured
phones are getting Paging when group number is dialed however newly
configured phones are only getting in their own group. As in the below
configuration there are two Paging groups configured.
1. 620 to make announcement for all classroom
2. 610 to make announcement for all teachers phone
3. 600 to make announcement for both
The only issue is with newly installed IP Phones that when 600 is dialed
they are not getting announcement, however when 299 is dialed they are
getting announcement. Do I have to configure something on phones.
Below is the configuration.
ephone-dn 298
number 620
name Classroom Page
paging ip 239.1.1.3 port 2000
!
ephone-dn 299
number 610
name teachers Page
paging ip 239.1.1.2 port 2000
!
ephone-dn 300
number 600
name Paging All
paging ip 239.1.1.1 port 2000
paging group 298,299
!
ephone 27
device-security-mode none
mac-address 0013.1111.1111
username "user2"
paging-dn 299 unicast
type 7940
button 1:27
pin 1234
Regards,
Shahid
Blogs and organic groups at http://www.ccie.net
Received on Sun Sep 23 2012 - 22:05:42 ART
This archive was generated by hypermail 2.2.0 : Mon Oct 01 2012 - 06:40:29 ART